Long-Term Storage - 1 Month Or More - Lifesaver CUBE User Manual

LONG-TERM STORAGE
1 MONTH OR MORE
Before storing the Cube:
• Remove and discard the activated carbon filter from the Cube and clean
the Cube (see page 9 for how to clean the Cube).
• Release pressure from the Cube by unscrewing the pump slowly by 1/4 turn
until you hear a hiss sound. Hold on to the pump firmly whilst unscrewing.
After pressure is released screw the pump back into place.
• Store at least 2 inches / 5 cm of water in the Cube at all times.
• Ensure the pump and tap are sealed.
Before re-using the Cube:
• Clean the Cube before re-use (see page 9 for how to clean the Cube).
• Fit a new activated carbon filter before re-use (see page 7 for how to
install an activated carbon filter).
How to prevent hardness salts building up on the cartridge during
long-term storage
Prolonged storage in areas of hard water will result in the crystallisation of
calcium, magnesium and salts on and within the membranes of the cartridge.
To prevent this from happening, change the storage water on a regular basis,
every 4-6 weeks. Failure to do so will cause the membranes to fill up, the
nano pores to block and the system to shut down. This is not covered under
your warranty and you will need to purchase another cartridge.
13