Routine Use - After Priming The Lifesaver ® Bottle - Lifesaver bottle Instruction Manual

ROUTINE USE - AFTER PRIMING THE LIFESAVER
After priming, fill the bottle with water. Cleaner water will result in a faster flow rate and
longer cartridge life. When filling the bottle with water keep the snap-fit lid closed to
keep the nozzle clean and free from contamination.
6
Unscrew and remove the pump base from the bottle. Fill with
1
water through the blue pre-filter sponge to within 1 inch/2.5 cm
of the brim. The flow rate will be faster when the bottle is full of
water. Screw the pump base back into place.
Open the snap-fit lid and pump a maximum of 4 - 6 times.
2
Open the nozzle with your teeth to drink directly from the
3
bottle or open with clean hands to allow the water to flow into
a clean cup.
During use, pump another 4 - 6 times to increase water flow.
4
BOTTLE
®