Do you have a question about the LIBERTY and is the answer not in the manual?
Questions and answers
Rob
January 18, 2025
Lifesaver liberty, can't open the bottom to depressurize, it's completely stuck what can I do to get it open?
1 comments:
Mr. Anderson
May 14, 2025
To open the bottom of a Lifesaver Liberty that is stuck and won't depressurize, slowly unscrew the pump base by ¼ turn until you hear a hissing sound. This releases the pressure. Do not force it open while the bottle is pressurized, as this may damage the product.
Page 1
ESSENTIAL FOR SURVIVAL LIFESAVER ™ LIBERTY USER MANUAL...
Page 2
YOUR LIFESAVER PRIMING LIBERTY BOTTLE Priming is an essential step that must be performed before you start to use the bottle to drink from. Correct priming will accelerate the flow rate during use. Watch video or follow the instructions below.
flow of top of your bottle as pictured for additional water storage. clean water. 6. Using a LifeSaver Hydration Bladder Connector (sold separately) 6. Pump gently to sustain flow rate as required. connected to the drinking spout, you can fill an external hydration bladder such as a CamelBak ®...
This will not have come from the bottle but may come from the user’s saliva. Always remove and discard the activated carbon filter when storing ™ the LifeSaver Liberty bottle long term.
MAINTENANCE HOW TO REMOVE AND AND CARE RE-FIT THE FILTER CARTRIDGE Do not allow grit, sand or other abrasive matter to enter the bottle. The filter cartridge simply screws into and out of the top of the If this happens it should be removed by rinsing. Abrasive matter bottle carcass.
MEMBRANE MAINTAINING THE PATENTED INTEGRITY CHECK HYBRID PUMP SYSTEM Over time it is possible for the pumping action to become stiff. 1. Unscrew and remove the pump base from the bottle. To maintain the pump: Half fill with water. 1. Unscrew and remove the pump base from the bottle and empty the 2.
Page 7
10 years from the date of manufacture. between 5–20°C (41–68°F). TRANSPORTING YOUR ACTIVATED LIFESAVER BOTTLE ON A PLANE CARBON FILTERS An activated carbon filter, if sealed in its original polyethylene wrapping, When taking the bottle on an airplane ensure that you release all...
Need help?
Do you have a question about the LIBERTY and is the answer not in the manual?
Questions and answers
Lifesaver liberty, can't open the bottom to depressurize, it's completely stuck what can I do to get it open?
To open the bottom of a Lifesaver Liberty that is stuck and won't depressurize, slowly unscrew the pump base by ¼ turn until you hear a hissing sound. This releases the pressure. Do not force it open while the bottle is pressurized, as this may damage the product.
This answer is automatically generated