How To Output The Journal Report - Panasonic KMF0209634C2 Service Manual

3.3.5.1.8 HOW TO OUTPUT THE JOURNAL
REPORT
TOP PREVIOUS NEXT
Refer to BUTTON CODE TABLE ( for KX-FM90HG-W)
1. Press 2 times.
2. Rotate
3. Press button.
4. The report prints out.
Error code table:
Refer to ERROR CODE TABLE
(1) CODE (2) RESULT
PRESSED THE STOP KEY
DOCUMENT JAMMED
NO DOCUMENT
THE COVER WAS OPENED SND & RCV The cover is open.
40 NO RESPONSE
41 COMMUNICATION ERROR
42 COMMUNICATION ERROR
43 COMMUNICATION ERROR
44 COMMUNICATION ERROR
46 COMMUNICATION ERROR
48 COMMUNICATION ERROR
49 COMMUNICATION ERROR
50 COMMUNICATION ERROR
51 COMMUNICATION ERROR
52 NO RESPONSE
54 ERROR-NOT YOUR UNIT
58 COMMUNICATION ERROR
59 ERROR-NOT YOUR UNIT
65 COMMUNICATION ERROR
file://C:\Documents%20and%20Settings\Admin\Plocha\SCHÉMATA\VIDEA\PAN...
until the " Journal " is displayed.
().
(3) MODE
SND & RCV Communication was interrupted by the STOP button.
SND The document paper is jammed.
SND No document paper.
SND Transmission is finished when the T1 TIMER expires.
SND DCN is received after DCS transmission.
SND FTT is received after transmission of a 2400BPS training signal.
SND No response after post message is transmitted three times.
SND RTN and PIN are received.
RCV No response after FTT is transmitted.
RCV No post message.
RCV RTN is transmitted.
RCV PIN is transmitted (to PRI-Q).
RCV PIN is transmitted.
RCV Reception is finished when the T1 TIMER expires.
RCV DCN is received after DIS transmission.
RCV DCN is received after FTT transmission.
SND DCN responds to the post message.
SND DCN is received before DIS reception.
http://servis-manual.com/
(),
SYMPTOM
Stránka č. 1 z 10
Counter-
measure*
1
2
3
4
5
6
7
8
8
8
9
11
13
14
2
27. 10. 2004