Advertisement
Quick Links
Advertisement
Related Manuals for AeroGarden Farm 12
Summary of Contents for AeroGarden Farm 12
- Page 1 Assembly Guide Simple Steps to Get Your Farm Up and Growing Farm 12 | Farm 12XL...
- Page 2 All required hardware is included. Save this document for future reference. Code Part Base Metal Bars LED Light Water Bowl Grow Deck LED Light Power Cord Screws Tool Trellis Support (long) Trellis Support (short) Metal Frames & Drain Hose Washers AeroGarden.com...
- Page 3 (2) Screws H. Note: Touchscreen is the front and cords from Metal Frame should be facing toward the back of the Top A. CAUTION: DO NOT let Top fall over before securing screws in Metal Frame. AeroGarden Farm Assembly...
- Page 4 Carefully insert Metal Frame into Top notches. Metal Frame using Tool to tighten, two (2) Washers CAUTION: DO NOT let Top fall over before securing two (2) Screws H. screws in Metal Frame. AeroGarden.com...
- Page 5 Step 2 Repeat for Metal Frame R Step 2 Repeat for Metal Frame R Stand up the AeroGarden Farm Top and Metal Frames. Repeat Steps 2 & 3 for Metal Frame R. AeroGarden Farm Assembly...
- Page 6 (4) Screws H. Note: You may need to pull frames closer in order to fit the bars. Hand tighten all screws on Top and Metal Frames R, fully tighten after you finish installing the Base Metal Bars B. AeroGarden.com...
- Page 7 Pump Nozzle Move AeroGarden Farm to its final location before continuing. Place Water Bowl over Base Metal Bars and place Grow Deck over Water Bowl (as shown above). Make sure the 2 cords (pump and water indicator) coming from inside Water Bowl are properly positioned out of the back side in the Water Bowl notches.
- Page 8 Release Light hanging cords from underneath Top A. the Pump and Water Indicator cords coming from behind your Water Bowl. Match the endings of the Pump and Water indicator, to the corresponding power plugs. Position behind Water Bowl when done. AeroGarden.com...
- Page 9 (4) Repeat for all 4 holes. corner one at the time. (2) Insert one of the small metal endings from the Light hanging Remember: The Power Plug needs to be facing toward your Left Frame “L”. cords into the small opening. AeroGarden Farm Assembly...
- Page 10 INNER side of each of the posts of the Metal Frames of your underneath Top A. AeroGarden Farm. Pinching the clips at the ends of the small Trellis cords, attach them to the long Trellis cords at any desired intervals.
- Page 11 Your Farm is ready to grow. See enclosed Quick Planting Guide to plant your Farm Once all parts are in place, plug your AeroGarden Farm into a standard 110V-120V outlet and follow the instructions on the Touch Screen or your AeroGarden Farm’s Quick Planting Guide.
- Page 12 ‘Wall of Growth’ to produce food for your entire family. Farm Stacking Kits (sold separately) are available at AeroGarden.com For more detailed information about growing in your AeroGarden, please visit: www.aerogarden.com/product-guides 1-800-476-9669 USA | 1-800-611-9058 - CANADA www.aerogarden.com/contact-support NEED SUPPLIES, ACCESSORIES OR INFORMATION? Visit Our Website: www.AeroGarden.com...