Playing The Ipod - Sony CMT-BX50BTi Operating Instructions Manual

Playing the iPod

You can listen to audio contents stored in
the iPod.
1
Select the iPod function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
2
Place the iPod.
3
Start playback.
Press  (or iPod  on the unit)

.
4
Adjust the volume.
Press VOLUME +/ (or VOL +/ on

the unit) .
Notes
 When placing or removing the iPod, handle
the iPod in the same angle as that of the iPod
connector  on the unit and do not twist or
sway the iPod to prevent connector damage.
 Do not carry the unit with an iPod set
on the connector. Doing so may cause a
malfunction.
 When placing or removing the iPod, brace
the unit with one hand and take care not to

press the controls of the iPod by mistake.
 Before disconnecting the iPod, pause
playback.
 While playing video, you cannot use
/
forward) by holding down /
 To change the volume level, use VOLUME
+/ (or VOL +/ on the unit)
volume level does not change even if adjusted
on the iPod.
 This system is designed for iPod only. You
cannot connect any other portable audio
players.
 To use an iPod, refer to the user's guide of
your iPod.
 Sony cannot accept responsibility in the
event that data recorded to iPod is lost or
damaged when using an iPod with this unit.

. You can fast rewind (fast

. The
Continued

.

21
GB