Adding Fuel - Greencut GLM680SX Instruction Manual

Hide thumbs Also See for GLM680SX:
Table of Contents

Advertisement

Available languages

Available languages

54

ADDING FUEL

The suitable type of fuel for this engine is NATURAL 95.
After unscrewing the fuel tank cap, add the fuel, pouring it in all the way up to the collar of the fuel
tank but do not overfill it.
Always add fresh, clean and approved lead-free petrol with an octane rating of at least 95.
CAUTION
In the event that you spill any oil or fuel on the lawnmower when refi lling, wipe it
away immediately. Do not store or add fuel or handle it in any way in the vicinity of
an open fire.
CAUTION
Fuels mixed with alcohol or fuels with ethanol or methane additives may bind
moisture to themselves, which may result in separation during storage and the
formation of acids. Subsequently during storage the acid vapours may damage
the fuel system of the lawnmower engine. These fuels must not be used in the
lawnmower.
IMPORTANT INFORMATION
When not using the lawnmower for longer than 30 days, drain the fuel tank, start
the engine and let it run until the fuel lines and the carburettor are empty (the
engine will stop on its own). This will prevent future engine problems.
Before using it again, add fresh fuel into the fuel tank. For more information, see
chapter Storage instructions.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Glm690sx

Table of Contents