Safety First - Quincy Compressor QR-25 Series Instruction Manual

SECTION 1 SECTION 1
SECTION 1 SECTION 1 SECTION 1

Safety First

DANGER !
WARNING !
CAUTION !
QR-25 Series
52201-105, May 2003
At Quincy Compressor safety is not only a primary concern, but a faithfully
performed practice. Beginning with the design stage, safety is built into "The
World's Finest Compressor". It is the intention of this manual to pass along the
"safety first" concept to you by providing safety precautions throughout its
pages.
"DANGER !", "WARNING !", and "CAUTION !" are displayed in large
bold capital letters in the left hand column to call attention to areas of vital
concern. They represent different degrees of hazard seriousness, as stated
below. The safety precaution is spelled out in bold upper and lower case letters
in the right hand column.
Immediate hazards which will result in severe personal injury or
death.
Hazards or unsafe practices that could result in personal injury or
death.
Hazards or unsafe practices which could result in minor personal
injury, product or property damage.
Each section of this instruction manual, as well as any instructions supplied
by manufacturers of supporting equipment, should be read and understood
prior to starting the compressor. If there are any questions regarding any part
of the instructions, please call your local Quincy Compressor Distributor, or the
Quincy Compressor factory before creating a potentially hazardous situation.
Life, limb, or equipment could be saved with a simple phone call.
Compressors are precision high speed mechanical equipment requiring
caution in operation to minimize hazard to property and personnel. There are
many obvious safety rules that must be observed in the operation of this type
of equipment. Listed below are some additional safety precautions that must
be observed.
•Transfer of toxic, dangerous, flammable or explosive substances using Quincy
Compressor products is at the user's risk.
•Turn off and lockout/tagout (per OSHA regulation 1910.147) the main power
disconnect switch before attempting to work or perform any maintenance.
•Do not attempt to service any part of the unit while it is operating.
•Per OSHA regulation 1910.147, relieve the system of all pressure before
attempting to service any part of the unit.
•Do not operate the unit with any of its safety guards, shields, or screens
removed.
1
Quincy Compressor
3501 Wismann Lane, Quincy IL - 62305-3116
SAFETY SAFETY
SAFETY SAFETY SAFETY