What's In The Box; Assembly; Installing The Wall Mount & Tool Storage Station - Bissell PET HAIR ERASER 2897 Series Quick Start Manual

What's in the Box?

Standard accessories may vary by model. To identify what should be included with your purchase,
please refer to the "Carton Contents" list located on the underside of the insert inside the carton.
Hand Vacuum Extension Wand Foot

Assembly

Go to BISSELL.ca/support for assembly videos.
1. 2.
Connect the Extension Wand Connect the Hand Vacuum
to Motorized Floor Cleaning to the Extension Wand. You'll
Foot. You'll hear a "click" when hear a "click" when they're
they're connected. connected.
Installing the Wall Mount & Tool Storage Station
Go to BISSELL.ca/support for more tips and video instructions.
1. 2.
Insert tool holder on the side Screw the wall mount into
of the wall mount. a wall. Ensure the mount
is high enough up off the
ground for the vacuum to hang
comfortably. Screwing into
a wall stud will provide best
support.
Pet TurboEraser® Crevice Tool Wall Mount & Tool
Tool Storage Station
3.
Wrap cord on the side of the
product where the cord clips
are located.
3.
Hang the vacuum on the
center storage piece and
insert tools on the tool holder
provided.
BISSELL.ca 3