Navigation Key; Creating Multi-Line Labels; Adding Symbols; Designing Your Label - Dymo Rhino 5000 User Manual

Navigation Key

You can review and edit your label using the
and arrows on the Navigation key.
You can also view menu choices using
and then press to make a selection.

Designing Your Label

You can choose from a number of formatting
options to enhance the appearance of your labels.

Changing the Font Size

You can print the text on your label in five font
sizes: extra-small, small, medium, large, and extra-
large. Figure 7 shows the Font menu.
XS S M L XL
Figure 7
The font size you can use depends on the
size of label tape that is installed in the printer.
To set the font size
1. Press .
SIZE
2. Use the arrow keys to select a font size.
3. Press .

Creating Multi-Line Labels

You can create multi-line labels depending upon
the size of the label tape, as follows:
1/4"
Tape Size
(6 mm)
Number
1
of Lines
To create a multi-line label
1. Type the text for the first line, and press
2. Type the text for the next line.
3. Repeat these steps for each additional line.
6
and ,
3/8" 1/2" 3/4"
(9 mm) (12 mm) (19 mm)
2 2

Adding Symbols

The printer supports the extended symbol set as
shown in Figure 8.
,
\ =
∅
To add a symbol
1. Press
symbols shown in Figure 8 is displayed.
2. Use the arrow keys to move to the desired
symbol. Use
a row of symbols. Use
vertically through the rows of symbols.
3. When you locate the desired symbol, press
to add the symbol to your label.
In addition, commonly used electrical and datacom
symbols are available on individual keys for easy
entry. See Figure 9.

Using International Characters

The printer supports the extended Latin character
set using RACE technology. Similar to using a
4
mobile phone keypad, typing a letter multiple times
within a very short time will scroll through variations
of that letter.
.
( ) ;
°
²
∗ _
Figure 8
+ . The first row of
and to move horizontally along
and
Figure 9
' "
& ?
@ ±
to scroll