Advertisement
SWITCH TO HF:
1. POWER ON
2. Press the button "Up" to Ant Mode
3. Keep the HF/UV switch UP
4. Press the Up/Down button on the center position of your analyzer to change to different HF
bands (BAND A to F)
Notes: Frequency range in HF bands (BAND A to F), a small frequency overlap may be possible, please
see the following:
A: 1.5-2.7 MHz
B: 2.5-4.8 MHz
C: 4.6-9.6 MHz
D: 8.5-18.7 MHz
E: 17.3-39 MHz
F: 33.7-71 MHz
Antenna Mode:
Press the "Up" key on "SWR Analyzer
or Frequency Counter" menu will enter the
Antenna Mode.
In this mode, it will test and show your antenna system's several parameters, such as SWR, Z, Rs, Jx
values. All of these parameters are showed on the LCD.
ANTENNA TEST EXAMPLES:
HF and VHF test:
1.
TURN ON your analyzer (It will show the power on message)
Press "Up" for the backlight on or off
2.
Press "Up" to enter the Antenna Analyzer Mode
3.
4.
Switch to the band you want to operate (See the band selecting part)
Turn the "Tuning Konb" to your frequency point to see the tested results (SWR, Z, Rs, Jx).
5.
4
Advertisement
