Advertisement
FEATURES LIST:
1.
SINGNAL SOURCE
2.
CAPACITANCE METER
3.
INDUCTANCE METER
4.
SHOW REACTANCE VALUE
5.
SHOW IMPEDANCE VALUE
6.
SWR VALUE FROM 1.1 TO 9.99
7.
RF STRENGTH METER
8.
FREQUENCY COUNTER
SPECIFICATIONS:
1.
Band Coverage : 160m, 80m, 40m, 20/30m,10/15m, 6m, 2m, 70cm
2.
RF Output Level : 2Vpp
3.
SWR Range : 1~9.9
4.
Impedance Range: 10~500ohm
5.
Reactance Range:
6.
L measurement Range:
7.
C measurement Range:
8.
External Power : DC 10.8~12V
9.
Battery : 8 * AA Alkaline Battery
10.
Power Consumption : < 150mA (HF Bands, B/L Off), < 165mA (VU Bands, B/L Off)
11.
Weight: 0.6 kg
12.
Size: 155 (W)× 100 (D)× 55(H)
GENERAL GUIDE:
When you turn on the analyzer by pressing the "POWR" switch down, a sequence of messages will be
displayed on the LCD. It's the callsign of designer and backlight function indicator.
To turn up the backlight, you need
to press and hold the "Up" button within
the time that the message showed on
the screen. If the message is cleared,
you need to power off the unit and
re-power on again for the operation.
If you do nothing, AW07A will entry
next Menu (SWR Analyzer or Frequency
Counter) in 1 Sec. Press "Down" button
to Frequency Counter Mode, while
pressing "Up" button entering the Antenna Test Mode. Also the current DC voltage is displayed.
Please see the picture below for the front panel operation.
2
Advertisement
