Silvercrest STS 850 E1 Operating Instructions Manual page 55

Crisping bread rolls
Never lay bread rolls directly onto the toaster, always use the bread roll rack 7.
1) Fold out the two feet of the bread roll rack 7.
2) Place the bread roll rack 7 onto the appliance so that the feet protrude into
the toasting slots 8 and the bar between the toasting slots 8 fits into the
arched sections on the feet. In this position, the bread roll rack 7 sits on the
appliance stably.
3) Place the bread rolls onto the bread roll rack 7 and start the toasting
procedure. Set the toasting dial 6 to the desired browning level. We
recommend setting the browning level to 2, but the setting may vary
depending on the bread type and personal taste.
NOTE
► After toasting, the rolls will be very hot.
4) As soon as the toaster switches itself off, turn the rolls over to crisp the other
side and then switch the toaster back on.
5) When you are finished with the bread roll rack 7, you can fold it for
space-saving storage:
–
Wait until the bread roll rack 7 has cooled down.
–
Remove it from the appliance.
–
Fold the feet of the bread roll rack 7 back in.
Crumb tray
When toasting, crumbs that fall from the bread are collected in the crumb tray 0.
1) To empty crumbs from the crumb tray 0, simply pull it out.
2) Tip out the crumbs.
3) Slide the crumb tray 0 back into the toaster so that it palpably engages.
■ 52 │ GB │ MT STS 850 E1