Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha Bws YW125 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Tail/brake light

1
2
3
4
1. Tail/brake light
If the tail/brake light does not come
5
on, have a Yamaha dealer check its
electrical circuit or replace the bulb.
6
7
8
9
EAU43040
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
1
1. Turn signal light bulb
6-27
EAU24204
1. Turn signal light bulb
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise
the lens may break.
EAU1722A
1
[ECA11191]