Water Intake Fault - Miele HG07 Operating Instructions Manual

Frequently Asked Questions

Water intake fault

Problem
The / indicator
light flashes on and off.
 and 173 appear
alternately on the time
display.
The dishwasher stops
during a program.
The / indicator
light is flashing.
The fault number  or
 appears in the
display.
The dishwasher stops
during a program.
Fault number 8
appears in the time
display.
62
Possible cause and solution
The water supply faucet is turned off.
 Turn on the water supply faucet fully.
Before remedying the fault:
 Turn the dishwasher off with the  button.
There is a problem with the water intake.
 Turn on the water supply faucet fully and start the
program again.
 Clean the filter in the water intake (see "Cleaning
the filter in the water intake" under "Cleaning and
care").
 The water connection pressure is lower than
50 kPa.
Seek professional advice.
 The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see "Water drainage" under
"Installation").
A technical fault has occurred.
 Turn the dishwasher off.
 Close the faucet.
 Contact Miele Service.