Program options
Factory default settings
If you have altered any settings, you
can reset them back to the factory
default settings.
Turn the dishwasher off with the
button, if it is turned on.
Press the Start button in and, while
holding it in, turn the dishwasher on
using the button.
Keep the Start button pressed in for
at least 4 seconds until the Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
50
Press the Program button 19 times.
The left program indicator light will emit
1 long flash and 9 short flash at
intervals.
The flashing sequence in the time
display indicates whether the setting
deviates from the factory default
setting:
- : all values are factory default
settings.
- : at least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the Start
button.
The setting is now saved.
Turn the dishwasher off with the
button.