Security Door; Control Circuit; Programmers; System Specification - Xeltek Superpro SB02 User Manual

XELTEK Automatics

4.1.4. Security Door

Security door rule: When the system is running, the security door must be turned off.
Once the security door is turned on, the system will stop immediately.

4.1.5. Control Circuit

4.1.6. Programmers

On the left is the SB05 applicable programmer group, divided into two groups before and
after, a total of 8 modules, through the 8usb line alone communication.
On the right is the programmer group for SB02, and the 4 module is centralized to 1 USB
cable communications via the hub board.

4.2. System Specification

4.2.1. Motion parameters

Maximum machine efficiency: up to 2500UPH.
Composition: High performance Motion Control Board + servo system + screw and guide
rail.
Accuracy: X-axis: ±0.02Mm;y axis: ±0.02Mm;z axis: ±0.02mm.
Effective Stroke: X-axis: 1000Mm;y axis: 500Mm;z axis: 40mm.
Nozzle accuracy:±0.07mm.
SB0X
User Manual Rev. 03 - 5th MAY 2020
SB-02&05
User Manual
XELTEK. 2019. All rights reserved.
14 of 200