Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Evolve Power Beam
Summary of Contents for Evolve Power Beam
- Page 1 Power Beam Installation Guide...
- Page 2 * These Items are available through customer service at 856.552.4000. Tape Measure Gloves Please contact your Evolve Service Representative at 856.552.4000 for any questions or concerns. NOTE: Any alterations to listed components will void the manu- by alterations in accordance with national or local electrical facturer’s warranty.
- Page 3 STEP 2: Attach the plastic blocks (c) to the bottom, and the until it clicks. spacers (d) to the top of the power beam. *The plastic blocks (c) are to be attached with screws, while the spacers (d) come with STEP 2: Position the receptacle into the mounting bracket on the an adhesive.
- Page 4 INSTALLATION GUIDELINES INSTALLATION GUIDELINES Power Beam - Electrics Power Beam - Over Panels (Extension Modules) Base Feed and Base Feed Cover *Remove or do not install the plastic spacers (d). Remove or do not install the top trim yet (e).
- Page 5 STEP 4: Push felt down firmly and evenly into the channel. 8 - Self Drilling Screw Note: First attach power beam to legs, level it and then start installing laminate end panel. Fasten spring clip to leg with screws (8) to hold end-of- run trim (5).
- Page 6 EVOLVE EVOLVE INSTALLATION GUIDELINES INSTALLATION GUIDELINES Privacy Glass installation with new seals Privacy Glass Installation Instructions Parts List 1 Glass 2 Aluminum Top Trim with channel STEP 1: Remove screw 3 12” Spacer Clip 4 Block 5 Glass Seal 6 End Cap...
- Page 7 EVOLVE EVOLVE INSTALLATION GUIDELINES INSTALLATION GUIDELINES Privacy Glass Installation Instructions Privacy Glass Installation Instructions STEP 5: Install PVC spacer in the middle STEP 9: Plastic seal with grooves on the top side. For ease of installation, use 1/2” plastic seal.
- Page 8 EVOLVE EVOLVE INSTALLATION GUIDELINES INSTALLATION GUIDELINES Privacy Glass Installation Instructions Privacy Glass Installation Instructions STEP 12: Hold privacy glass from both ends (2 people) and install STEP 15: Ensure that the 2 adjacent privacy glass pieces are aligned privacy glass ensuring that the glass seal is fully aligned.
- Page 9 Privacy Glass Installation Instructions Power Beam Storage Cabinet Instructions STEP 17: Check the squareness of glass STEP 1: Assemble Power Beam with legs and level it, place two connectors flat STEP 18: If needed, pull in the opposite direction and check again...
- Page 10 STEP 8: Use power drill to fasten bracket with screw lifting storage narrow side on floor. repeat on other end cabinet until gable touches bottom tube STEP 6: Cut out in top under Power Beam bottom tube STEP 9: Extend glides to support cabinet and level cabinet Page 18 • evolvefurnituregroup.com...
- Page 11 EVOLVE EVOLVE INSTALLATION GUIDELINES Privacy Glass Installation Instructions STEP 10: For overhead install top horizontal tube with bottom trim STEP 11: Install top trim and brackets STEP 12: Attach overhead with provided screws to brackets Page 20 • evolvefurnituregroup.com evolvefurnituregroup.com • Page 21...
- Page 12 EVOLVE showrooms and distribution centers throughout the united states SHOWROOMS Atlanta Chicago New York City New Jersey (Southern) St. Louis 10 10th Street, Suite 150 The Merchandise Mart 386 Park Avenue South, 119 Greentree Road 5 Document Drive Atlanta, GA 30309...
Need help?
Do you have a question about the Power Beam and is the answer not in the manual?
Questions and answers