1. Manuals
  2. Brands
  3. Evolve Manuals
  4. Office Equipment
  5. SHOWROOMS
  6. Installation manual

Evolve SHOWROOMS Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Evolve Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SHOWROOMS and is the answer not in the manual?

Questions and answers

Related Manuals for Evolve SHOWROOMS

Summary of Contents for Evolve SHOWROOMS

  • Page 1 Evolve Installation Guide...

  • Page 2: Table Of Contents

    Worksurface Supporting Pedestals Laminate End panels Optional Accessory Rail Please contact your Evolve Service Representative at 856.552.4000 for any questions or concerns. NOTE: Any alterations to listed components will void the manu- by alterations in accordance with national or local electrical facturer’s warranty.
  • Page 3 EVOLVE INSTALLATION GUIDELINES Evolve Required Tools Additional items you may find useful: Safety Glasses #2 Phillips Screwdriver Rubber Mallet #3 Phillips Screwdriver Metal Pick* 1/2” Wrench Fabric Spline Roller* 9/16” Wrench Power Prill (var speed, rev) Adjustable 8” Wrench Magnetic drill bit holders Needlenose Pliers 1/4”...

  • Page 4: Corner Connections - Equal Height

    EVOLVE INSTALLATION GUIDELINES Corner Connections - Equal Height Parts List 1 Aluminum corner post 1, 2, 3 or 4 slotted posts with leveling glide (attached to aluminum corner post) 1, 2, 3 or 4 single clamps Appropriate trim, 1 Top cap Corner Posts are used to connect panels of equal height at a corner.

  • Page 5: Corner Connections - Variable Height

    EVOLVE INSTALLATION GUIDELINES Corner Connections - Variable Height Two-Way, Three-Way and Four-Way, Corner Posts Parts List 1 Aluminum corner post 1, 2, 3 or 4 slotted posts of varying heights with levelling glide (attached to aluminum corner post) 1, 2, 3 or 4 single clamps...

  • Page 6: Corner Connections - Corner Post Extension

    EVOLVE INSTALLATION GUIDELINES Corner Connections - Corner Post Extension Two-Way, Three-Way and Four-Way Parts List 1 Aluminum corner extension post 1, 2, 3 or 4 non-slotted posts (attach to aluminum corner post) 1, 2, 3 or 4 variable-height clamps Appropriate trim Corner Post Extensions are used to connect Panel Extension Modules at a corner.

  • Page 7: Inline Connection - Variable Height

    EVOLVE INSTALLATION GUIDELINES Inline Connection - Variable Height Parts List 1 Slotted post with levelling glide 2 Variable-height clamps A Variable-Height Connector is used to connect two panels of differing heights in a straight run. A Variable-Height Connector must match the height of the taller panel.

  • Page 8: Inline Connection - Panel Extension Module

    EVOLVE INSTALLATION GUIDELINES Inline Connection - Panel Extension Module Parts List 1 Non-slotted post with attached aluminum inserter 2 Variable-height clamps An Inline Panel Extension Connector is used to attach the panel extension modules to the top of an existing run of panels. The combination of one 66”...

  • Page 9: End-Of-Run Post Kit

    EVOLVE INSTALLATION GUIDELINES End of Run Post Kit Parts List: 1 Slotted post with levelling glide 1 Single clamp 1 End trim kit 2 Metal Clips per each trim. An End-of-Run Kit is used at the end of each panel run.

  • Page 10: End-Of-Run Post Kit - Wall Mount Application

    STEP 8: Place trim on wall at marked location and mark holes. STEP 9: Drill holes in wall STEP 10: Attach trim to wall. (Evolve does not supply mounting hardware) STEP 11: Reattach the panel top cap. STEP 12: Slide the panel onto the trim Wall Mount.

  • Page 11: Felt Dividers

    EVOLVE INSTALLATION GUIDELINES Felt Dividers STEP 1: Place Blocks (4) into position STEP 2: Remove strips off of tape underneath 12” Spacer Clip (3) and locate in middle of panel STEP 3: Align felt evenly within the channel STEP 4: Push felt down firmly and evenly into the channel.

  • Page 12: Privacy Glass

    EVOLVE INSTALLATION GUIDELINES Privacy Glass installation with new seals Parts List 1 Glass 2 Aluminum Top Trim with channel 3 12” Spacer Clip 4 Block 5 Glass Seal 6 End Cap 7 Small Glass Seal in middle A Wall Mount is the same as an End-of-Run Post Kit.
  • Page 13 EVOLVE INSTALLATION GUIDELINES Privacy Glass Installation Instructions STEP 1: Remove screw STEP 2: Install block and screw back using the same screw. It is important to start the installation from the middle panel. STEP 3: Blocks installed STEP 4: Peel off double sided tape...
  • Page 14 EVOLVE INSTALLATION GUIDELINES Privacy Glass Installation Instructions STEP 5: Install PVC spacer in the middle STEP 6: Locate top trim and adjust sideways to the middle of the slot STEP 7: Snap on block STEP 8: Install next top trim while ensuring that both trims are fully aligned Page 14 •...
  • Page 15 EVOLVE INSTALLATION GUIDELINES Privacy Glass Installation Instructions STEP 9: Plastic seal with grooves on the top side. For ease of installation, use 1/2” plastic seal. STEP 10: Plast plastic seal on the head of the block screw with grooves facing down. Adjust the plastic seal symmetrically on the top of the trim on both sides.
  • Page 16 EVOLVE INSTALLATION GUIDELINES Privacy Glass Installation Instructions STEP 12: Hold privacy glass from both ends (2 people) and install privacy glass ensuring that the glass seal is fully aligned. STEP 13: If glass seal slides off place, pull glass up and re-install as indicated in the previous step.
  • Page 17 EVOLVE INSTALLATION GUIDELINES Privacy Glass Installation Instructions STEP 15: Ensure that the 2 adjacent privacy glass pieces are aligned and a tight gap is left between the 2 edges (3/32”) STEP 16: Installation of privacy glass is complete with shiny side out and logo on the bottom left corner evolvefurnituregroup.com •...
  • Page 18 EVOLVE INSTALLATION GUIDELINES Privacy Glass Installation Instructions STEP 17: Check the squareness of glass STEP 18: If needed, pull in the opposite direction and check again STEP 19: When installation is fully satisfactory, cut protruding plastic seal with exacty knife...

  • Page 19: Privacy Ceiling

    EVOLVE INSTALLATION GUIDELINES Privacy Ceiling filler Install Parts List 1 Felt 2 Aluminum Top Trim with channel 3 12” Spacer Clip 4 Block 5 Ceiling filler PVC Cap STEP 1: Ceiling filler includes standard felt divider and PVC cap STEP 2: Try top trim on top of panel without...

  • Page 20: Door Panel

    EVOLVE INSTALLATION GUIDELINES Door Panel Installation STEP 1: The door is ordered with either a left or a right swing. Check layout for proper placement and swing. It can be easily changed on site from one side to another. Please see the instructions below.
  • Page 21 EVOLVE INSTALLATION GUIDELINES Door Panel Installation - Changing the door swing STEP 1: Remove the hinges from the door frame. STEP 2: Pull out door stop extrusion, reverse and snap back in. STEP 3: Remove, rotate and re-attach the striker plate.

  • Page 22: Privacy Screen

    EVOLVE INSTALLATION GUIDELINES Privacy Screen The Privacy Screen provides enclosure and semi-privacy to a station. Privacy Screen can be mounted “on module” only onto 36” and 42” wide panels, minimum height of 66”. STEP 1: Determine the top and bottom of the Privacy Screen.

  • Page 23: Sliding Panel Door Lock

    EVOLVE INSTALLATION GUIDELINES Sliding Panel Door Lock If the floor is carpeted, ensure that carpet grippers (included in hardware packet) are installed on the levelers of the panels, mainly in door / opening. For permanent positioning, Floor Mount Plate is Floor Mount recommended.

  • Page 24: Evolve Panel Removal

    EVOLVE INSTALLATION GUIDELINES Evolve Panel Removal Page 24 • evolvefurnituregroup.com...

  • Page 25: Evolve Module Removal

    INSTALLATION GUIDELINES Evolve Module Removal Disassembly of an Evolve panel can be done on site. The panel must first be removed from the panel run and turned on its side. Step #1. Remove the screws from the metal side frame.

  • Page 26: Mobile/Freestanding Monolithic Privacy

    EVOLVE INSTALLATION GUIDELINES Mobile/Freestaning Monolithic Privacy Panels STEP 1: Connect the Bridge Panel (1) to the Connectors (2) using four clamps (6) with two 1/2” flat head screws. Two clamps at the top and two and the bottom. STEP 2: Insert Connector Foot (3) into bottom of Connectors (2) STEP 3: Attach the plastic spacers (7) to the top and bottom of the Bridge Panel.
  • Page 27 EVOLVE INSTALLATION GUIDELINES Mobile/Freestaning Monolithic Privacy Panels STEP 1: Connect the Bridge Panel (1) to the Connectors (2) using four clamps (6) with two 1/2” flat head screws. Two clamps at the top and two and the bottom. STEP 2: Insert Connector Foot (3) into bottom of Connectors (2) STEP 3: Attach the plastic spacers (7) to the top and bottom of the Bridge Panel.

  • Page 28: Wiring Schematic

    EVOLVE INSTALLATION GUIDELINES Wiring Schematic 4-2-2 Wiring Schematic 8-Wire Shared Neutral “2+2” – 2 Utility circuits, 2 dedicated 8 Wires 2 Dedicated Circuits 4 Lines (12 ga.) Receptacles 2 Neutrals (10 ga.) Duplex – Up to 12 receptacles per circuit (Up to 48 infeed) 2 Grounds (12 ga.)

  • Page 29: Jumper Cables And Pass-Through Cables

    EVOLVE INSTALLATION GUIDELINES Pass-Through Cables Parts List 1 Jumper Cable or Pass-Through Cable EVECJ16 Jumper Cables and Pass-Through Cables are utilized to electrical- ly connect Power Distribution Housings in panels that have been mechanically linked. Jumper Cables electrically connect Power Distribution Housings in two adjoining powered panels or two powered panels separated by a post.

  • Page 30: Reversible Floor Power Entry

    EVOLVE INSTALLATION GUIDELINES Reverseable Floor Power Entry Parts List 1 Reverseable Floor Power Entry The Floor Power Entry is used to connect the electrical distribu- tion system to the building power network at a floor level junc- tion box. Ensure that all panels are mechanically connected prior to elec- trical connection.

  • Page 31: Ceiling Power Entry

    EVOLVE INSTALLATION GUIDELINES Ceiling Power Entry Parts List 1 Ceiling Power Entry A Ceiling Power Entry is used to connect the electrical distribu- tion system to the building power network at an above ceiling level junction box. The Ceiling Power entry is installed by plug- ging directly into a Power Distribution Housing.

  • Page 32: Duplex Receptacle

    EVOLVE INSTALLATION GUIDELINES Duplex Receptacle Parts List 1 Duplex Receptacle The Duplex Receptacles plug into and mechanically attach to the Power Distribution Housings. The receptacle is internally ar- ranged to connect to the circuitry designated by the symbol on its face.

  • Page 33: Cable Capacity

    EVOLVE INSTALLATION GUIDELINES Cable Capacity Without Electrics With Electrics Cable Capacity With and without Electrics All Cables are 0.354” in diameter. Capacity of the empty raceway is 24 wires. Capacity of the raceway with electrics installed is 24 wires. Without Electrics...

  • Page 34: End Panel

    EVOLVE INSTALLATION GUIDELINES End Panel Parts List 1 End Panel An End Panel attaches a worksurface to a panel connector and provides solid support at the end of a run of worksurfaces. Identify correct setting of worksurface mounting brackets (left and right, single or supporting adjacent worksurface) and install the panel mounting bracket accordingly.

  • Page 35: Cantilever

    EVOLVE INSTALLATION GUIDELINES Cantilever Parts List 1 Cantilever A Cantilever attaches a worksurface to a panel connector and may be used to support two convergent worksurfaces. Identify correct setting of brackets (left, right, single or double worksurface support). STEP 1: Identify correct setting of brackets (left, right, single or double worksurface support).

  • Page 36: Worksurface Supporting Pedestals

    EVOLVE INSTALLATION GUIDELINES Worksurface Supporting Pedestals Parts List 1 Worksurface-supporting pedestal According to your plan, select the type of pedestal which is going to be used as a worksurface support. Identify which side of the pedestal is to be attached to the panel slots and install the panel mounting bracket accordingly.

  • Page 37: Laminate End Panels

    EVOLVE INSTALLATION GUIDELINES Laminate End Panels STEP 1: Insert hooks of brackets in the panel slots and pull down. STEP 2: Push up top brackets and tighten screw to secure panel. STEP 3: Attached worksurface brackets. STEP 4: Put worksurface on the worksurface brackets, attach with screws.

  • Page 38: Overhead Flipper Door Storage Unit

    EVOLVE INSTALLATION GUIDELINES Overhead Flipper Door Storage Unit Parts List 1 Overhead Flipper Door Storage Unit Identify both left and right shelf gables and determine their loca- tion on panel. STEP 1: Insert upper hook of metal bracket into panel slot and pull upward.

  • Page 39: Corner Shelf

    EVOLVE INSTALLATION GUIDELINES Corner Shelf Parts List 1 Corner Shelf 1 Flat Bracket Corner Shelf was developed for better utilization of a space above Corner Worksurface. Identify left or right corner shelf end bracket and determine its location on a panel.

  • Page 40: Low-Profile Shelf

    EVOLVE INSTALLATION GUIDELINES Low-Profile Shelf Parts List 1 Low-Profile Shelf A Low-Profile Shelf is usually installed so that the bottom aligns with the bottom of the adjacent unit. Identify left or right shelf brackets and determine their location in the panel slot.

  • Page 41: Top Mount Overhead

    EVOLVE INSTALLATION GUIDELINES Top Mount Overhead Installation Parts List 1 EVSSOHBKTS Inline Single Top Mount Overhead Bracket 2 Side Gables 1 Laminate Divider 2 Metal Back 2 Overhead Shelf – Top and Bottom 2 Sliding Glass 4 Plastic Extrusion for Sliding Door #1 4 Plastic Extrusion for Sliding Door #2 STEP 1: Install EVSSOHBKTS brackets into panel connectors.
  • Page 42 EVOLVE INSTALLATION GUIDELINES Page 42 • evolvefurnituregroup.com...

  • Page 43: Panel Mounted Overhead Storage Unit - Ada Compliant

    EVOLVE INSTALLATION GUIDELINES Panel Mounted Overhead Storage Unit - ADA Compliant Parts List 1 Overhead Storage Unit Begin by ensuring that the panel is leveled and properly supported to prevent twisting. STEP 1:Insert top brackets with teeth facing down into panel slots. Tap down if neces- sary until the bracket is completely engaged.

  • Page 44: Up-Mount Conversion Kit

    EVOLVE INSTALLATION GUIDELINES Up-Mount Conversion Kit Parts List 1 Back Panel for Overhead 1 Set of Up-Mount Cantilevers To convert a panel mounted overhead unit into a up-mounted one, begin by removing the unit from the panel. Remove inter- nal covers bypushing two tabs (protruding through the bottom shelf) up, then moving the bot- tom of the internal cover away from the side wall.

  • Page 45: Fine Tuning Of Up-Mount Overhead Storage Unit

    EVOLVE INSTALLATION GUIDELINES Fine Tuning of Panel Mounted Overhead Storage Unit - ADA Compliant The overhead storage units are factory assembled and inspected. Tension of the door mechanism is adjusted in accordance with the size and the weight of the door.

  • Page 46: E-Stor - Two Lateral Cabinet Assembly

    EVOLVE INSTALLATION GUIDELINES e-STOR - Two Lateral Cabinet Assembly Instructions STEP 1: Once the lateral cabinets are in their final position, level both cabinets so they are flush with each other. STEP 2: Attach the cabinets together by screwing through the side walls using four supplied self-drilling screws.

  • Page 47: Storage Cabinets With Pass Through Cables

    STEP 5: Replace the raceway covers and drawers. Note: EVE8CPxx - Evolve standard Pass-Through Cables which are used for electrical connection of the Power Distribution Housings in two powered panels separated by two non-powered Storage Cabinets (xx=94 for two 30”...

  • Page 48: Double Wall Overhead

    EVOLVE INSTALLATION GUIDELINES Double Wall Overhead Identify both left and right gables and determine their location on panel STEP 1: Insert hooks of metal brackets into panel slot and pull gable downward and tap with rubber mallet to ensure connection...

  • Page 49: Double Wall Overhead Glazed Door

    EVOLVE INSTALLATION GUIDELINES Double Wall Overhead Glazed Door Identify both left and right gables and determine their location on panel STEP 1: Insert hooks of metal brackets into panel slot and pull gable down- ward and tap with rubber mallet to ensure connection.

  • Page 50: J" Bars For Double Wall Overhead - Wall Mount

    EVOLVE INSTALLATION GUIDELINES “J” Bars for Double Wall Overhead - Wall Mount NOTE: Care should be taken to fasten the “J” Bars only to wall studs with correct fasteners. Failure to do so may result in collapse of unit and subsequent possible personal injury.

  • Page 51: Double Wall Cabinet

    EVOLVE INSTALLATION GUIDELINES Double Wall Cabinet Identify both left and right side wall, hold it upside down and at- tach brackets, and determine their location on panel. Note: Side wall must have bracket using three threaded studs at bottom (bracket teeth point up). Top bracket is using one threaded stud (bracket teeth point down).
  • Page 52 EVOLVE INSTALLATION GUIDELINES Page 52 • evolvefurnituregroup.com...

  • Page 53: Off Module Worksurface Bracket

    EVOLVE INSTALLATION GUIDELINES Off Module Worksurface Bracket STEP 1: Prior to installing the Off-Module Worksurface Bracket (EVHOMB1), install adjoining worksurface at normal height from the floor (23 slots up from the bottom of the connector post). STEP 2: Install the Load Bar, purchased separately, at the same height (23rd slot) as the neighboring worksurface support bracket.

  • Page 54: Lock Clip Installation

    EVOLVE INSTALLATION GUIDELINES Lock Clip Installation Lock Clip can be installed in any slot (except very top) occupied by most of our brackets. STEP 1: Place the lock clip in such a way that short part is toward the bracket.

  • Page 55: Pass Thru Sliding Door

    EVOLVE INSTALLATION GUIDELINES Pass Thru Sliding Door Lock Clip can be installed in any slot (except very top) occupied by most of our brackets. STEP 1: Install vertical Pass Thru Trim STEP 2: Install PVC Track at bottom and put both Glass at angle, put top PVC track on top of glass as shown.

  • Page 56: Name Plate

    EVOLVE INSTALLATION GUIDELINES Name Plate STEP 1: Insert a paperclip into the opening along the edge of the frame as illustrated. STEP 2: Push the paperclip toward centre and lift the transparent screen. Place name card into the frame and replace the screen.

  • Page 57: Accessory Retainer

    EVOLVE INSTALLATION GUIDELINES Accessory Retainer STEP 1: Mount the accessory on the load bar. 3” black rubber retainer for use with paper STEP 2: Push the accessory retainer (1) into the gap above the management accessories. accessory (2) to lock it into place.
  • Page 58 EVOLVE showrooms and distribution centers throughout the united states SHOWROOMS Atlanta Chicago New York City New Jersey (Southern) Washington, DC 10 10th Street, Suite 150 222 Merchandise 386 Park Avenue South 119 Greentree Road 1130 Connecticut Atlanta, GA 30309 Mart Plaza...

Table of Contents