Table of Contents
Advertisement
U
s
i
n
g
t
NOTE: Some screen savers
interfere with the operation of
Auto Image. If you' r e experiencing
problems, try turning your screen
saver off, then turning Auto Image
off and back on.
NOTE: When you connect an
HDTV source, the projector
automatically displays the image in
16x9 format.
32
h
e
P
r
o
Image Menu
Display
F
25
IGURE
Image menu
Overscan
This option crops all the edges of the image to remove noise gen-
erated on the edges by your source. This option is available for
video sources only.
Image Position
This setting allows you to re-position a 16x9 or native mode
video image. Select among top, bottom, and center by highlight-
ing Image Position in the menus and clicking either mouse but-
ton to cycle through the options.
Auto Image
The projector automatically adjusts tracking, signal synchroniza-
tion and vertical and horizontal position for most computers
(Auto Image does not apply to video sources). If you want to
adjust these features manually, you must turn off
by highlighting Auto Image in the Image menu and clicking the
left or right mouse button to select "off".
Resize
This option works differently for computer and video sources.
For computer sources,
scaling it up or down. It only affects computer images that are not
the projector's native resolution. When
makes the best fit of the image to the computer screen. If you turn
off (by highlighting it in the Image menu and clicking the
Resize
left or right mouse button to select "off"), the image may be either
cropped or too small for the screen.
j
e
c
t
o
r
Audio
Image
Controls
>
>
Overscan
Image position
Auto image
Resize
Manual sync
Manual tracking
Horizontal position
Vertical position
Zoom
automatically resizes the image by
Resize
Language
Status
on
top
on
on
Auto Image
is on, the projector
Resize
first
Advertisement
Table of Contents
Troubleshooting
