Garland Best Keeper XTRIM 140 DW Instruction Manual page 36

English
7. MANTENIMIENTO Y SERVICIO
Perform regular inspections on the machine to
ensure efficient machine operation. For a complete
maintenance we recommend that you take the
machine to your technical service.
It is always necessary to stop the engine and
verify that the cutting tool is stopped before cleaning
or transporting the machine.
Never try to adjust the machine while it is running.
Perform all maintenance on the machine with the
machine on a flat, unobstructed surface.
Remove the battery from the machine before
performing any operation on the machine. Read the
instruction manual before carrying out any operation.
Always perform maintenance or service with the
battery removed
WARNING !: Do not modify the machine or the
cutting elements. An inappropriate use of these
Items can cause SERIOUS PERSONAL INJURY OR
DEATH.
Keep the machine clean, especially the motor
ventilation windows.
Removal of safety devices, improper maintenance,
replacement of elements with non-original spare parts
can cause personal injury.
7.1. MAINTENANCE AND CARE AFTER USE
Carry out the following maintenance and care
operations when you are finished working with the
machine to ensure the correct operation of this
machine in the future.
7.1.1. CLEANING
Before cleaning your unit, unplug the machine.
Attention !: Always clean the machine after use.
Failure to carry out proper cleaning can cause damage
to the machine and cause a malfunction. Whenever
possible, clean immediately after work.
Keep your machine clean and in good condition.
Do not clean the engine with water. The electric motor
could be damaged.
Clean the casings of your machine with a cloth
dampened in water. Never use gasoline, solvents,
detergents, water or any other liquid to clean the
machine.
7.1.3. ENGINE VENTILATION DUCTS
Remove dirt from the ventilation ducts in order not to
damage the motor and avoid a possible fire.
7.1.4 TO GREASE THE GEARBOX
36/124
8 h
each
8 hours