SAEVO BioQualyAir 40L Owner's Manual page 37

CORRECTIVE AND PREVENTIVE MAINTENANCE
AND PRESERVATION
Preventive Maintenance
The equipment should be calibrated routinely, as per the legislation in force in the country.
But never with a period exceeding 3 years.
In order to protect your equipment, seek Saevo technical assistance for periodic revisions
of preventive maintenance.
FIlter Change:
Keep the air filter(s) (B) clean and in good
condition of usage. The air filter (B) prevents
dust from entering into the compressor and
reduces the operating noise. Over time, the
filter will become dirty, reducing the air inlet
flow and causing the decrease of compressor
performance. The filter should be replaced
every 3 months on average or before,
depending on the air quality. Additional filters
are available for purchase through the Saevo
Technical Assistance network.
To perform the change, open the filter
enclosure by turning the metal cover (A);
remove the old filter and insert the new one;
put the cover (A) again by turning it in the
opposite direction.
Corrective Maintenance
If the equipment has any abnormality, check
if the problem is related to any of the items
listed in the item Unforeseen Events (situation,
cause and solution). If it is not possible to
solve the problem, turn off the equipment, and
request Saevo technical assistance.
Overload protector:
The overload protector is designed to
protect the equipment from overheating. If
the overload protector (08) trips, wait for 5
minutes until the compressor cools down and
reset it again; in the recurrence of the trip,
turn off the equipment and see Saevo Technical
Assistance.
37 37