Summary of Contents for Happybeds Tetras 4ft Metal Bed
Page 1
DO NOT jump on the product or any of its parts. DO NOT use this product if any parts are missing, damaged or worn. DO NOT use this product unless all fixings are secured. Please keep these instructions for future reference. www.happybeds.co.uk...
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Birlea Vendor: S000053 Suppliers of Inspiration ASSEMBLY INSTRUCTIONS TETRAS 5' BED IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR TETRAS 5' BED FRAME. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. HEALTH & SAFETY : DO NOT jump on this bed frame. DO NOT use this bed frame if any parts are missing, damaged or worn.
Page 4
Vendor: S000053 Part List Hardware List (found in box 1) Part Description Part Description Headpost (L/R) M6 x 20mm JCBC Screw Footpost (L/R) M6 x 50mm JCBC Screw Headend M6 x 35mm JCBC Screw Footend M6 Nut Side Support Double Slat Cap Side Frame Single Slat Cap M8 x 50mm JCBC Screw...
Page 5
Vendor: S000053 Step 2: Fix the Side Support (5) to the Headposts (1) and Footposts (2) using hardware parts (A). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Small Allen Key Step 3: Place the Side Frame (6) at the bottom of the Side Support (5) using hardware parts (B) and (D).
Page 6
Vendor: S000053 Step 6: Adjust both of the Side Supports Step 7: Press hardware part (E) into the Mid Support (7) then place hardware part (F) onto (5) into inner direction until the an end of every slat (9). screws reach the end of the hole as DO NOT use any power tools as this may damage the frame and will shown.
Page 7
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...