OptConnect ema Windows Networking Manual page 11

For more information on these parameters, please refer to Telit's AT command manual for the
LE910-V2 cellular module.
3. Update the CDC_NCM connection settings: In the dialogue that was opened in step 2 above,
select the radio buttons next to "Use the following IP address:" and "Use the following DNS server
addresses:". Enter the corresponding values that were recorded in step 2 above. When complete,
the dialogue should look similar to Figure 7.
Figure 7
Click "OK" to save the connection settings and return to the Network Connections window as
shown in Figure 8. Double click on "Local Area Connection #". It should now take you to the
Status Dialogue. Click on "Details". Locate the "Physical Address" line and record this value.
Reference Figure 9.
© OptConnect Management, LLC 2020. All rights reserved. Revision 1.2 11