Related Manuals for Pamex Kapture KP1-D7
Summary of Contents for Pamex Kapture KP1-D7
-
Page 1: Table Of Contents
Product Introduction & User Instructions Kapture KP1-D7 (KP1-D791, KP1-D7P1) Smart Home Lock With Mechanical Key Kapture KP1-LINK (Optional) 05/2020 Agenda Product Features Operation Modes Common Functions Keypad Programming Mode Stand-Alone Mode Link Mode Detailed Function Description First time to power up... -
Page 2: Product Features
Lock Firmware Update Install/Remove LINK Real-time notification Upgrade LINK Firmware FCC Statement NCC Statement Product Features Included In The Box (Smart Lock) ● A Smart Lock ● 4 AA Batteries ● A Deadbolt ● Mounting Hardware ● Installation Guide (Hardware) ●... -
Page 3: Common Functions
○ Under Stand-Alone mode, and if connecting the Kapture lock to a Kapture Link, the lock will be capable of providing the remote control management. Not only the real-time events can pop-up on the Kapture app but also an alert notification will receive immediately on the app. -
Page 4: Keypad Programming Mode
➔ The low battery alert will notify the user’s app when the smartphone is close enough. ➔ When using the R eport Problem on the Kapture App, Pamex will respond as soon as we can to provide you better support. -
Page 5: Link Mode
Link Mode Requires : ● A Smart Phone With Bluetooth Capability (iOS, Android Supported) and internet access. ● Install the Kapture app and r egister a Kapture Cloud account. ● A Kapture LINK ● A Wifi AP Key Features : ➔... -
Page 6: Access The Lock Via The Keypad Code
● The latch extends first when reconnecting the batteries with the lock unlocked. ● In Stand-Alone Mode : ○ After battery change, you need to access the lock via the Kapture app to restart the audit trail. ○ A battery change will be recorded in the audit trail. ●... -
Page 7: Low Battery Level
● Short press the privacy button, and there are two statuses that can tell out from the lit led. ○ Red LED flash x 2 - Privacy mode on ○ Green LED flash x 2 - Privacy mode off ● Long press the privacy button for 5 seconds, and there are two statuses that can tell out from the lit led. -
Page 8: Reset The Lock
Set Auto-Lock delay seconds=00: off 10 seconds seconds=10 ~ 99 : on Default 10 secs Set Buzzer volume Level = 0 : off 20 level Level = 1~3 : on, low/medium/high Default 2 Set Lock out params 40: turn off the lockout 41: turn on lockout (default is ○... -
Page 9: Lock Out
● In Link Mode : ○ An audit trail remains. ○ A real-time alert will be sent to the Owner’s and Family’s app. Lock Out ● When locking out, the keypad panel is out of function and the Led keeps flashing slowly every 5 seconds. -
Page 10: Kapture Cloud Account Registration (Sign Up)
○ The latch does not extend thoroughly when user access via the keypad code or the app. ■ Exterior Led beeps and flashes in red three times. ■ The app shows the lock jammed icon. ■ An alert is sent. ○... -
Page 11: Lock Settings In Kapture App
● A lock can be paired to a Kapture Cloud account. And the account will be the Owner to the lock. ● To change the Owner, please reset the lock and pair it to another new account. The former Owner account will no longer access the lock via the app and removal to the lock is recommended. -
Page 12: Access The Lock Through The App
■ Able to check the audit trail. ■ Able to revise the lock settings and the keypad code. ■ Able to access the lock at any time when near the lock. ■ In LINK Mode : ● Able to receive a real-time alert/notification. ●... -
Page 13: Audit Trail
● An invitation accompanied a keypad code. Different operation modes deal with the keypad code differently. ○ Stand-Alone Mode: ■ When invited, a 4-7 digits keypad code, called Master code to Owner, needs to be set when the invitee’s app is in connect with the lock via the Bluetooth. -
Page 14: Report Problem
Lock out for 3 mins at <datetime> Lock out for 30 mins at <datetime> Lock out forever at <datetime> Report Problem ● When using the Report Problem on the Kapture App, Pamex will respond as soon as we can to provide you a better support. - Page 15 Lock Firmware Update ● You can use the Kapture App to update the lock firmware and check if the latest version exists through Kapture Cloud. ● The app is able to update the lock firmware when the smartphone is in connect with the lock via the Bluetooth.
- Page 16 ● Owner and Family can subscribe to the push notification which is interested. Below are the push notifications that we provide. Please note that the Security Alert cannot be disabled due to its significance. Category Notification <lockName> locked by app at <datetime> by Family, Guest Specific <email,fullname>...
- Page 17 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 18 NCC Statement 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變 更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時， 應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通 信或工業、科學及醫療用電波輻射性電機設備之干擾。...
Need help?
Do you have a question about the Kapture KP1-D7 and is the answer not in the manual?
Questions and answers