Mounting The Burner - Riello G3 Installation, Use And Maintenance Instructions

MOUNTING THE BURNER

It is necessary that the insulating gasket
(9, fig. 1) is placed between the boiler
door and the burner flange.
This insulating gasket has six holes,
which, if necessary, can be modified as
shown on the drawing on the right.
Verify that the installed
burner is lightly leaned
towards the button.
(See figure 2).
The burner is designed
to allow entry of the flex-
ible oil-lines on either
side of the burner.
BURNER FIXING
D5242
Fig. 2
D5218
3
GB
S7387
20013745