Download Print this page
Ninja HPFSV2 Owner's Manual

Ninja HPFSV2 Owner's Manual

High pressure fill station

Advertisement

Quick Links

Ninja Paintball
NINJA HIGH PRESSURE FILL STATION V2 OWNER'S MANUAL
TECHNICAL SUPPORT VIDEOS AVAILABLE AT OUR YOUTUBE CHANNEL : NINJA PAINTBALL OFFICIAL
SPECIFICATIONS
MAX INPUT PRESSURE
MAX RATED OUTPUT PRESSURE
RANGE OF ADJUSTMENT
GAS COMPATIBILITY
CGA FITTING
STANDARD GAUGES
FILL ADAPTOR
NOTE 1:
THE FILL STATION IS INTENDED FOR USE WITH NITROGEN, HPA (HIGH PRESSURE AIR), AND ANY OF
THE OTHER COMMONLY AVAILABLE INERT GASES.
UNDER NO CIRCUMSTANCES SHOULD THIS FILL STATION BE USED WITH OXYGEN!!!
THIS UNIT IS ALSO NOT CERTIFIED FOR USE WITH COMBUSTIBLE, CORROSIVE, OR TOXIC GASES.
NOTE 2:
THE FILL STATION IS DELIVERED WITH A 5000 PSI STAINLESS STEEL "QD" STYLE FILL ADAPTER TO
ALLOW THE ATTACHMENT OF THE SYSTEMS TO BE RECHARGED. THIS IS BY FAR THE MOST COMMON
ADAPTER, AND IS IN WIDESPREAD SERVICE ON MOST SYSTEMS CURRENTLY ON THE MARKET. THE
USER MUST BE AWARE THAT THIS QD IS RATED FOR A 5000 PSI WORKING PRESSURE, AND MUST
ONLY BE REPLACED WITH A 5000 PSI RATED QD! CALL 815-477-0007 FOR REPLACEMENT QDS.
WARNING:
DO NOT HOOK UP YOUR HIGH PRESSURE FILL STATION UNTIL YOU HAVE READ AND UNDERSTOOD THE SETUP
PORTION OF THIS MANUAL.
Proudly made in the USA
Part Number: HPFSV2
PROUDLY MADE IN THE USA!
Maintenance Kit Included
Patent Pending
6000 PSI
5000 PSI
0 – 5000 PSI
NITROGEN or HIGH PRESSURE AIR (HPA)
CGA 677 LEFT HANDED THREAD CONNECTION FOR BULK TANK
OPPOSITE END FOR FILL STATION ¼" -18 NPT
(4501-6000 PSI Nitrogen)
BULK TANK 0-6000 PSI 1/8-27 NPT
OUTPUT 0-6000 PSI 1/8-27 NPT
STAINLESS STEEL FOSTER 5000 PSI RATED "QD" TYPE
ALWAYS WEAR SAFETY GOGGLES WHEN WORKING WITH HIGH PRESSURE GAS!!
JULY 2019
815-477-0007
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the HPFSV2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ninja HPFSV2

  • Page 1 Proudly made in the USA 815-477-0007 NINJA HIGH PRESSURE FILL STATION V2 OWNER’S MANUAL JULY 2019 Part Number: HPFSV2 TECHNICAL SUPPORT VIDEOS AVAILABLE AT OUR YOUTUBE CHANNEL : NINJA PAINTBALL OFFICIAL PROUDLY MADE IN THE USA! Maintenance Kit Included Patent Pending SPECIFICATIONS...
  • Page 2 Ninja Paintball Proudly made in the USA 815-477-0007 SETUP 1. THE FIRST STEP IS TO PROPERLY SECURE THE SUPPLY CYLINDER TO PREVENT TIPPING.  This can be accomplished by chaining the cylinder to a wall or post or by securing the tank in a commercially available safety skid.
  • Page 3 Ninja Paintball Proudly made in the USA 815-477-0007 The first information you need is the production date on the bottle.  In the United States, it is Federal Law that any gas storage vessel over two inches in diameter must be periodically re-tested.
  • Page 4: The Operating Controls

    Ninja Paintball Proudly made in the USA 815-477-0007 The next piece of information you want is the Working Pressure Rating. As you can see, this information is also present in the data line on the bottle. o REFER TO THE LABEL ON THE BOTTLE FOR PRESSURE RATING AND TEST DATES.
  • Page 5 Ninja Paintball Proudly made in the USA 815-477-0007  Do not over-adjust, as this will cause damage to internal regulator system resulting in leaks.  Remember: You cannot dispense more pressure than the “Bulk Tank” gauge indicates!  Once the pressure is set to the output pressure you desire TURN THE CONTROL KNOB CLOCKWISE to release a small amount of air.
  • Page 6 Ninja Paintball Proudly made in the USA 815-477-0007 IDENTIFICATION STAMPED ON THE HEAD OF THE DISC. SOME DISC MAY HAVE THE PRESSURE IDENTIFIER ON THE SIDE OF THE DISC. SEE ILLUSTRATION above. If you are unsure do not guess see a qualified airsmith or call 815-477-0007 for assistance.
  • Page 7: Troubleshooting

    Proudly made in the USA 815-477-0007 TROUBLESHOOTING TECHNICAL SUPPORT VIDEOS AVAILABLE AT OUR YOUTUBE CHANNEL : NINJA PAINTBALL OFFICIAL PLEASE REFER THE BILL OF MATERIALS (BOM) Maintenance kit included THE FILL STATION INCORPORATES (3) 1/8-27 NPT PLUG PORTS, ITEM #1 ON THE BOM. THE (3) PORTS ARE LABELED “DO NOT REMOVE”...
  • Page 8 Ninja Paintball Proudly made in the USA 815-477-0007  The # 20 004 oring is located in the pocket and a pick will remove the oring but take care not to damage or scratch the internals during removal.  Make sure the unit is clean ...
  • Page 9 Ninja Paintball Proudly made in the USA 815-477-0007...
  • Page 10 Ninja Paintball Proudly made in the USA 815-477-0007...