Page 1
NINJA Proudly Made in the USA PCP Scuba Yoke Adapter SAFETY FIRST! ALWAYS KEEP ALL PETROLEUM LUBRICANTS AWAY FROM PARTS OF THE SCUBA FILL YOKE ADAPTER. PETROLEUM LUBRICANTS MAY CAUSE FIRE OR EXPLOSION IF ENTERED INTO THE HIGH PRESSURE TUBE OF YOUR PCP AIRGUN.
Page 2
SETTING UP THE PCP SCUBA YOKE FILL ADAPTER The Ninja Scuba Yoke connects high pressure scuba air cylinders or N2 bulk cylinders to a Pre-charged Pneumatic (PCP) airgun. On the backside of the fill station is a vent port.
Page 3
1.6 Check the airgun pressure gauge for complete fill per the air gun manufacturer recommendation. Upon completion of filling, close the valve by turning the knob completely in a clockwise direction. Open the vent on the Scuba Yoke fill adapter to relieve pressure. Then disconnect the quick disconnect from the gun.
Page 4
WARNING: Do NOT disconnect the hose under pressure. Disconnecting the hose under pressure could cause damage to the hose fitting and personal injury to the operator. 3.0 Maintenance and Care of the PCP Scuba Yoke Keep the PCP scuba yoke clean and dry.
Need help?
Do you have a question about the Scuba Yoke and is the answer not in the manual?
Questions and answers