Table of Contents
Advertisement
Optimizing RGB Picture Automatically
Adjusting the Image Using Auto Adjust
Optimizing an RGB image automatically.
Press the Auto Adjust button to optimize an RGB image automatically.
[Poor picture]
[Normal picture]
Press the Auto Adjust button to fine-tune the computer image or to remove any vertical banding that might appear and
to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmer-
ing). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also
adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image
appears to be shimmering.)
This adjustment may be necessary when you connect your computer for the first time.
NOTE:
Some signals may not be displayed correctly or take time.
• The Auto Adjust function does not work for component and video signal.
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Horizontal/Vertical Position Clock and Phase
manually. See page 48.
Turning Up or Down Volume
VIDEO
S-VIDEO
8767A/8769/8070
L-CLICK
VIDEO
S-VIDEO
VOLUME
8767A/8769/8070
L-CLICK
VIDEO
S-VIDEO
Increase volume
VOLUME
Decrease volume
Decrease volume
3. Projecting an Image (Basic Operation)
COMPUTER-1 COMPUTER-2
AUTO
ADJ.
R-CLICK
MOUSE
COMPUTER
AUTO ADJ.
1
2
ASPECT
HELP
PICTURE
FREEZE
Sound level from the speaker and the AU-
R-CLICK
MOUSE
DIO OUT jack (Stereo mini) on the projec-
COMPUTER
AUTO ADJ.
1
tor can be adjusted.
2
ASPECT
HELP
PICTURE
FREEZE
8771
SELECT
Increase volume
31
8771
SELECT
SOURCE
PIC-MUTE
Advertisement
Table of Contents
