Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of
the supplied power cable in the wall outlet.
To wall outlet ←
CAUTION:
Do not unplug the power cable from the wall outlet under any one of the following circumstances.
Doing so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the cooling fans are running. The cooling fans continue to work for 30 seconds after the projector is
turned off.
V ID
E O
IN
L /M
O N
A U
O
D IO
S -V
ID E
R
O IN
A U
D IO
L /M
O N
A U
O
D IO
C O
M P
R
U T
E R
A U
D IO
1 IN
O U
T
A U
D IO
C O
M P
U T
E R
C O
O U
M P
T
U T
P C
E R
C O
2 IN
N T
R O
L
A C
I N
Make sure that the prongs are fully inserted into
both the AC IN and the wall outlet.
22
2. Installation and Connections