About Yolink Control - Yolink YS6704-UC Installation & User Manual

About YoLink Control

YoLink Control is our unique device-to-device control technology. Using YoLink Control, YoLink
devices can be controlled without the Hub or an internet connec on. (Use of YoLink Control is
op onal; you can use the Automa on feature in the app OR use YoLink Control, but YoLink
Control offers the benefit of opera on without the Hub or internet connec on.)
One device controls another, directly. A device that sends out commands is called the controller. A
device that receives the commands is called the responder. Examples of a controller are a Door
Sensor or In-wall Outlet, while examples of a responder are another In-wall Outlet or a YoLink Plug
Mini
Pairing
To configure your In-wall
or via YoLink app (verif y the Status LED of In-wall
the POWER bu on for 5-10 seconds un l the LED quickly blinks green
To configure a YoLink Plug Mini
via YoLink app (verify the Status LED of YoLink Plug
POWER bu on for 5-10 seconds un l the LED quickly blinks blue
Upon pairing, the LED will stop blinking (this may happen a er only blinking two or three mes)
Outlet as a controller, Turn on the
as the responder
outlet
Outlet displays green). Press and hold
. Tur n on the plug using
Mini displays blue). Press and hold the
using POWER bu on
POWER bu on or
18