Makita DVC340 Instruction Manual page 5

Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for collecting dry dust.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DVC340
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DVC350
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : operation without load
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
END315-1
of the European
and returned to
ENE017-1
ENG905-1
) : 81 dB (A)
pA
) : 92 dB (A)
WA
) : 84 dB (A)
pA
) : 95 dB (A)
WA
ENG900-1
2
) : 2.5 m/s or less
h
2
ENG901-1
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for
an
future reference.
CORDLESS VACUUM CLEANER
SAFETY WARNINGS
WARNING! IMPORTANT READ CAREFULLY all
safety warnings and all instructions BEFORE USE.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
1. Operators must be adequately instructed on
the use of this cleaner.
2. This cleaner is not suitable for picking up
hazardous dust.
3. This cleaner is for dry use only.
4. This cleaner is for indoor use only.
5. This cleaner shall be stored indoors only.
6. Do not pick up the following materials:
− Hot materials such as lit cigarettes or
spark/metal
grinding/cutting metal
− Flammable materials such as gasoline,
thinner, benzine, kerosene or paint
− Explosive materials like nitroglycerin
− Ignitable materials such as Aluminum,
zinc, magnesium, titanium, phosphorus or
celluloid
− Wet dirt, water, oil or the like
− Hard pieces with sharp edges, such as
wood chips, metals, stones, glasses, nails,
pins or razors
− Powder to clot such as cement or toner
− Conductive dust such as metal or carbon
− Fine particle like concrete dust
Such action may cause fire, injury and/or
property damage.
7. Stop operation immediately if you notice
anything abnormal.
5
GEA010-1
ENB117-4
dust generated by