Table of Contents
Advertisement
8.1.8
Time zone
Calculation of arrival
times
8.1.9
Format
Units
8.1.10 Home address
Home address
Configuring XNAV3550
On the T
screen, select the time zone of the region you
IME ZONE
are currently staying in. This is necessary for the system to
indicate correct times of arrival in navigation mode.
Element
Time zone
Daylight saving
time
Note: If there is a clock change or if you are travelling into
another time zone, you will have to adjust the respective setting.
On the F
screen, determine which units are to be used for
ORMAT
time and distance indications.
Setting
Time
Distance
On the H
OME ADDRESS
to quickly start navigation homewards from anywhere.
1. Tap Enter your home address.
The D
ESTINATION
2. Tap the Address button and enter your home address as
described in "Entering an address".
3. Tap the Set as home address button.
The address is indicated on the H
Signification
Tap this entry field to select the time zone
of the region you are currently staying in.
Tap this entry field to switch between
daylight saving time (yes) and standard
time (no).
Signification
Tap the Time field to toggle between
12 hours (AM/PM) and 24 hours time
format.
Tap the Distance field to toggle between
kilometers or miles distance units.
screen, you may save your home address
screen opens.
OME ADDRESS
USER'S MANUAL XNAV3550
screen.
- 81 -
Advertisement
Table of Contents
