Table of Contents
Advertisement
8.1.5
Automode
Auto mode
Configuring XNAV3550
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode".
On the A
screen, you may effect the following
UTO MODE
modifications:
Setting
Begin with
3D Autozoom
2D Autozoom
2D View
Signification
Select the default map view: 2D or 3D.
Select the default for navigation with 3D
view:
Autozoom or No Autozoom.
With Autozoom, the system changes the
scale of the map depending on your current
speed: When you drive slowly, the scale
becomes small. When you drive fast, the
scale becomes high.
Select the default for navigation with 2D
view: Low Autozoom, Standard
Autozoom, High Autozoom, or No
Autozoom.
With Autozoom, the system changes the
scale of the map depending on your current
speed: When you drive slowly, the scale
becomes small. When you drive fast, the
scale becomes high.
The lower the Autozoom, the lower the
scale.
Select the default for navigation with 2D
view: North oriented or In driving
direction.
USER'S MANUAL XNAV3550
- 79 -
Advertisement
Table of Contents
