General Operation - Dual XDMR7700 Installation & Owner's Manual

XDMR7700

General Operation

Faceplate Removal
Semi-permanent
Faceplate Installation
Power On/Off
Programmable
Turn-On Volume
Shift Function
Loudness
Preset EQ Curves
6
OPERATION
With the unit off, press OPEN to allow the front panel to slide
down. Gently squeeze the release tab located on the bottom
center underside and pull faceplate down and away from unit
to remove. To install, insert left side faceplate first, then push
right side to secure.
Before installation, remove trim ring and install supplied
Phillips head #1 x 7/32" screws through left and right
underside of faceplate tray into faceplate.
Press PWR or any other button (except EJECT or OPEN) to turn
the unit on. Inserting a CD will turn the unit on automatically.
Press PWR to turn the unit off.
Mode Press MODE to select between AM/FM, *XM Radio, CD player
and auxiliary input. Modes of operation are indicated in the
display.
*Optional XM Satellite Radio Receiver and subscription
required for XM Radio operation.
Volume Adjust volume using rotary encoder (00-46).
Press and hold POWER for 3 seconds to program currently
selected volume level. "P-VOL" and the current volume level
will momentarily appear in the display.
Press SHIFT for 2 seconds to activate the SHIFT function.
The SHIFT icon will appear in the display. In XM Radio mode,
the SHIFT function must be active to access the LOUDNESS
and EQ functions. Press SHIFT again for 2 seconds to cancel.
Note:
The SHIFT function only applies to XM Radio operation.
Press LOUD to activate and deactivate loudness contour curve.
Activating this feature will enhance the bass and treble
frequencies when listening to music at low volumes.
Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK
and OFF (default) equalization curves. Any adjustment to the
Bass or Treble settings automatically cancels the current EQ
curve.