Table of Contents
Advertisement
INSTALLATION
The installation of drain hose
Drain
hose
inserted
Warning!
Warning!
•
Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
To place the end of drain hose:
1.For upper drain system
Levelling the washing machine
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
Check if the legs are closely attached
1.
the cabinet. If not, please turn them to
their original positions tighten the nuts.
Check alignment of the product with a
2.
spirit level and if required, correct.
3.Loosen the lock nut and turn the feet
until it closely contacts with
4.After being locked properly, press four
corners again to make sure that they has
been adjusted properly.
Clamping spring
into the drain
Trough Hose
to
the floor.
Retainer
foot
Lock nut
loosen
lock
Lower
Raise
9 9
right
wrong
Advertisement
Table of Contents
