Sony STR-DH700 Operating Instructions Manual page 44

Menu Parameters
[Display] [Display]
S-AIR S-AIR ID
[9- S-AIR] [ID SETUP]
(page 56)
Pairing
[PAIRING]
S-AIR Mode
[MODE]
RF Change
[RF SETUP]
S-AIR Standby
[STANDBY]
a)
For details, refer to the page in the parentheses.
b)
You can only select this parameter when the surround back speakers are set to "SINGLE".
c)
You can only select this parameter when the surround back speakers are set to "DUAL".
d)
This parameter is only available if the SiriusConnect Home tuner is connected to the SIRIUS jack on the
receiver.
e)
"AUDIO FOR HDMI" and "CONTROL FOR HDMI" scroll across the display, then "AUDIO" and
"CONTROL" appear respectively.
f)
You can only select this parameter when the surround back speakers are set to "NO".
g)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
44
US
g)
g)
g)
g)
g)
Settings
ID A, ID B, ID C
START, STATUS
PARTY, SEPARATE
RF AUTO, RF ON, RF OFF
STBY ON, STBY OFF
Initial
setting
ID A
PARTY
RF AUTO
STBY OFF