Performing Auto Calibration - Sony STR-DH700 Operating Instructions Manual

Performing Auto Calibration

TV INPUT
SLEEP DMPORT
VIDEO1 VIDEO2
SAT TV
2CH A.F.D.
1 2
4 5
7 8
>10
0/10
CLEAR
DISPLAY
O
RETURN/EXIT
1
Press AMP MENU.
2
Press AUTO CAL.
Measurement starts in 5 seconds and the
display changes as follows:
A.CAL [5] t A.CAL [4] t A.CAL [3]
t A.CAL [2] t A.CAL [1]
While the time is counting down, stand
away from the measurement area to avoid
measurement error.
32
US
TV ?/1
?/1
AV ?/1
?/1
switch
SYSTEM STANDBY
BD DVD
Input
SA-CD/CD TUNER
buttons
MOVIE MUSIC
THEATER
3
DVD/BD
AUTO
MENU
6
CAL
AUTO CAL
D.TUNING
9
D.SKIP
AMP
MEMORY AMP MENU
ENTER
MENU
TOOLS/
MUTING
OPTIONS
MUTING
TV VOL
MASTER VOL
MASTER
VOL +/–
MENU/HOME
3
Measurement starts.
The measurement process will take a few
minutes to complete.
The table below shows the display when
measurement starts.
Measurement for Display
Environment noise
level
Speaker connection MEASURE and SP
Speaker level
Speaker distance
* The corresponding speaker indicator lights
up in the display during measurement.
4
Measurement ends.
"COMPLETE" appears on the display
and the settings are registered.
When you have finished
Disconnect the optimizer microphone from the
AUTO CAL MIC jack.
Notes
• Auto Calibration cannot detect the subwoofer.
Therefore, all subwoofer settings will be
maintained.
• If you have changed the position of the speakers, it
is recommended that you perform Auto Calibration
again in order to enjoy the surround sound.
NOISE.CHK
DET. appears
alternately*
MEASURE and GAIN
appears alternately*
MEASURE and
DISTANCE appears
alternately*