Table of Contents
Advertisement
Basic setup
Clock setting
The Auto Clock function will automatically set the built-in clock (Month,
Day, Year and Time) when the DVD/VCR is connected to an Antenna or
Cable system and it is turned off. As the DVD/VCR searches for a
receivable station in your area and it receives a broadcast signal for
Auto Clock, the Auto Clock needs several minutes to set itself.
Auto clock setting
To set auto clock to off
When shipped from factory the AUTO CLOCK is set to "ON".
Preparation:
But if you do not want auto clock set (Adjustment):
• Turn ON the TV and set to the video input mode.
1
• Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
1
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2
Plug the AC Power cord to the AC outlet.
2
3
Make sure the DVD/VCR is turned off.
• If you press POWER, the Auto Clock
set is not effective.
4
Wait at least three minutes and press
POWER.
3
5
Press CALL to check the clock on the
screen.
8 : 47
AM
MON
CH 125
STEREO SAP
4
00 : 00 : 00 SP
6
If the clock is not set, check the antenna
condition. The auto clock may not function
properly if the reception condition is not
good.
Auto clock adjustment
5
The auto clock adjustment will be performed at
12:00 PM everyday if you turn off the DVD/VCR.
• If you use a cable box and you want auto clock
adjustment to be performed, the cable box must be
left on.
• The auto clock adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
24
Basic setup
Clock setting (continued)
If the auto clock process did not set the date and time correctly, you
must set them manually for timer recordings and daylight saving time.
Manual clock setting
6
EXAMPLE: Setting the clock to "8:30 AM" March,
23 (SAT), 2002.
1
Press VCR MENU.
2
Press SET + or – to select "SYSTEM SET
UP", press ENTER.
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
MENU
TIMER REC SET
change blinks, then press SET + or –.
AUTO REPEAT
ON
OFF
SAP
ON
OFF
CH SET UP
SYSTEM SET UP
Note:
After a power failure or disconnection of the power, the timer
〈+/-/ENTER/MENU〉
settings will be lost. In this case, reset the present time.
3
Press SET + or – to select "CLOCK SET",
then press ENTER.
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON
OFF
ON
OFF
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU〉
4
Press SET + or – to set the month, then press
ENTER.
MONTH
3
DAY
1 (WED)
YEAR
2000
TIME
12 : 00
AM
〈+/—/ENTER/CANCEL/MENU〉
5
Set the day, year and time as in step 4.
MONTH
3
DAY
23 (SAT)
YEAR
2002
TIME
8 : 30
AM
〈+/—/ENTER/CANCEL/MENU〉
26
CALL
POWER
2, 3
2, 4
1, 5
Press VCR MENU.
MENU
TIMER REC SET
ON
OFF
AUTO REPEAT
SAP
ON
OFF
CH SET UP
SYSTEM SET UP
〈+/-/ENTER/MENU〉
Press SET + or – to select "SYSTEM SET
UP", then press ENTER.
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
SAP
ON
OFF
CH SET UP
SYSTEM SET UP
〈+/-/ENTER/MENU〉
Press SET + or – to select "AUTO CLOCK".
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON
OFF
AUTO CLOCK
ON
OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU〉
Press ENTER to select "OFF".
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON
OFF
AUTO CLOCK
ON
OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU〉
Press VCR MENU repeatedly to return to the
normal screen.
• When the AUTO CLOCK is set to
"OFF", the Auto Clock adjustment
does not function.
• Set the clock manually
.
26
2-4
2-4
1
After setting the clock, date and time starts
functioning automatically.
8 : 30
AM
SAT
To set standard time
To set daylight saving time
In the rare event that you live within broadcast range of two
You can set the Daylight Saving Time automatically or
stations in two different time zones, the DVD/VCR may
manually.
recognize the wrong station for the Auto Clock set.
To correct the situation:
1
Press VCR MENU.
Press SET + or – to select "SYSTEM SET
1
Press VCR MENU.
UP", then press ENTER.
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
SAP
ON
OFF
CH SET UP
SYSTEM SET UP
〈+/-/ENTER/MENU〉
2
Press SET + or – to select "SYSTEM SET
UP", then press ENTER.
MENU
2
Press SET + or – to select "DAYLIGHT
TIMER REC SET
AUTO REPEAT
ON
OFF
SAVING TIME", then press ENTER.
SAP
ON
OFF
CH SET UP
SYSTEM SET UP
〈+/-/ENTER/MENU〉
3
Press SET + or – to select "STANDARD TIME",
then Press ENTER.
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
3
Press SET + or – to select one of the
NO NOISE BACKGROUND
ON
OFF
options, then press ENTER. Press VCR
AUTO CLOCK
ON
OFF
STANDARD TIME
DAYLIGHT SAVING TIME
MENU until the MENU screen is cleared.
〈+/-/ENTER/MENU〉
4
Press SET + or – to select your time zone,
then press ENTER.
ATLANTIC : GMT–4hours
EASTERN
: GMT–5hours
CENTRAL
: GMT–6hours
MOUNTAIN : GMT–7hours
PACIFIC
: GMT–8hours
ALASKA
: GMT–9hours
HAWAII
: GMT–10hours
AUTO
: AUTO SET
(GMT: Greenwich Mean Time)
5
Press VCR MENU twice to return to the
normal screen.
Notes:
• When shipped from factory, the DAYLIGHT SAVING
Notes:
TIME is set to "AUTO" position.
• To be able to select the standard time, the clock must first
• When the clock is not set, Daylight Saving Time setting
be set by "AUTO CLOCK" once.
is not available.
• If you live in Newfoundland and the Auto Clock does not
• When there is no Daylight Saving Time in your area,
function properly, set the AUTO CLOCK menu option to OFF
always select "OFF" position in step 3.
and set the clock manually.
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR's memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu
option is in the CATV mode.
TV/CATV selection
Setting channels automatically
1
Repeat left step 1 and press SET + or – to
Preparation:
select "AUTO CH MEMORY".
• Turn ON the TV and set to the video input mode.
• Press DVD/VCR to select the VCR mode. (The
VCR indicator will light.)
1
Press VCR MENU. Press SET + or – to select
"CH SET UP", then press ENTER.
2
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
SAP
ON
OFF
CH SET UP
SYSTEM SET UP
〈+/-/ENTER/MENU〉
2
Press SET + or – to select "TV/CATV".
CH SET UP
TV
CATV
AUTO CH MEMORY
ADD/DELETE
〈+/-/ENTER/MENU〉
3
Press ENTER to select the TV or CATV mode.
The arrow indicates the selected mode.
CH SET UP
TV
CATV
AUTO CH MEMORY
ADD/DELETE
TV
- VHF/UHF channels
CATV - CABLE TV channels
〈+/-/ENTER/MENU〉
4
Press VCR MENU until the menu screen is
cleared.
Note:
You can't select "CH SET UP" if you set the channel to "L1" or
"L2".
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
SAP
ON
OFF
CH SET UP
SYSTEM SET UP
〈+/-/ENTER/MENU〉
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON
OFF
AUTO CLOCK
ON
OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU〉
for manual setting
ON:
(forward one hour)
for manual setting
OFF:
(back one hour)
AUTO:
for automatic setting
(read XDS in the signal)
When you want to set the Daylight
Saving Time manually, on the first
Sunday in April you set to "ON", and
on the last Sunday in October you
set to "OFF".
DAYLIGHT SAVING TIME
ON
OFF
AUTO
〈+/-/ENTER/MENU〉
25
1-2
1, 3
1, 4
CH SET UP
TV
CATV
AUTO CH MEMORY
ADD/DELETE
〈+/—/ENTER/MENU〉
Press ENTER.
The auto tuning will start. The chan-
nel display will count up and when fin-
ished, the screen returns to normal.
CH 002
27
Advertisement
Chapters
Table of Contents
