Table of Contents
Advertisement
Advanced playback (DVD)
Selecting a language
You can select a preferred language and sound recording system from those
included on the DVD video disc.
Good morning!
Bonjour!
¡Buenos días!
Selecting a playback audio setting
DVD
VCD
1
2
Press AUDIO during playback.
The current audio setting is
displayed.
e.g.
ENG1 PCM 2CH
ENG2
D 2CH
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations.
64
Selecting sound channels of VIDEO CDs
Notes:
• When you turn on the DVD/VCR or replace a disc, player
You can switch left and right channels by pressing the
returns to the initial default setting
AUDIO button repeatedly during playback.
If you select a sound track which is not included on the disc,
the DVD/VCR plays a prior sound track programmed on the
disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections on
the disc menu.
Output sound conversion table (sampling frequency/quantization bit)
Audio selection from the menu
"Bitstream"
Recording system
Discs
BITSTREAM/PCM
ANALOG AUDIO
jack
OUT jacks
Dolby Digital
Bitstream
48 kHz/20 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
48 kHz/16 bit
48 kHz/24 bit
DVD video
Linear PCM
96 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
discs
96 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
96 kHz/24 bit
48 kHz/16 bit
48 kHz/24 bit
DTS
Bitstream
MPEG1, MPEG2
Bitstream
48 kHz/16 bit
VIDEO CDs
MPEG1
44.1 kHz/16 bit 44.1 kHz/16 bit
Linear PCM 44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
Audio CDs
DTS
Bitstream
(Noise)
52
Advanced playback (DVD)
On-screen display operation
When you turn on the on-screen display, you can view information on operational
status and access features and settings.
DVD
On-screen display operation
VCD
CD
.
Press DISPLAY
The following display appears.
Each time you press the DISPLAY button, the on-screen display changes as follows.
If you press the
/
buttons to select an icon, then press the ENTER button, you can access the
specific feature.
When you select an icon (
), there is no need to press the ENTER button.
*
See the pages in
for details on the features.
e.g. When playing a DVD video disc
2
3
0:08:16
Press DISPLAY again.
2
3
-0:21:28
Press DISPLAY again.
54
2
CANCEL
1, 2
Press AUDIO or
/
while the audio setting is
displayed on the TV screen.
Each time you press the AUDIO
button, the audio settings included
on the DVD video disc change.
If you press the
/
buttons, you
can select output sound format.
58
To turn off the audio setting display, press the
CANCEL button.
60
.
56
58
and output jacks on the rear panel
"Analog 2ch"
"PCM"
BITSTREAM/PCM
ANALOG AUDIO
BITSTREAM/PCM
ANALOG AUDIO
jack
OUT jacks
jack
OUT jacks
Bitstream
48 kHz/20 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/24 bit
48 kHz/16 bit
48 kHz/24 bit
96 kHz/16 bit
48 kHz/16 bit
48 kHz/16 bit
96 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
96 kHz/24 bit
48 kHz/16 bit
48 kHz/24 bit
Bitstream
Bitstream
48 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
44.1 kHz/16 bit
Bitstream
(Noise)
Bitstream
(Noise)
: 3D sound enhancement can function.
DISPLAY
/
ENTER
*
: Title number (Track number)
Locate a title or track using the number buttons.
46
*
: Chapter number
Locate a chapter using the number buttons.
46
*
: Elapsed time of the current title
To enter the time to locate a desired location.
: Audio setting
52
: Subtitle setting
51
: Angle setting
50
: To turn off the display.
*
: Title number (Track number)
Locate a title or track using the number buttons.
46
*
: Chapter number
Locate a chapter using the number buttons.
46
*
: Remaining time of the current title
To enter the time to locate a desired location.
: E.A.M. (Enhanced Audio Mode).
53
: To zoom a picture.
49
: "Audio Out Select" setting
58
BST: Bitstream
2CH: Analog 2ch
PCM: PCM
: To turn off the display.
(continued)
Selecting the sound enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
DVD
Selecting the sound enhancement
VCD
CD
To exit the audio enhancement selection
1
Press DISPLAY twice.
Press CANCEL.
The folling display appears.
2
3
-0:21:28
Notes:
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD/VCR is connected to an amplifier equipped
2
Press
/
to select the E.A.M icon, then
with Dolby Pro Logic Surround, select "Normal".
Otherwise, Dolby Pro Logic Surround may function
press ENTER.
differently than usual.
The sound enhancement menu
• Selecting "Dialogue" disables "Dynamic Range Control"
appears.
function
• During MP3 playback, the sound enhancement is not
effective.
Spatializer
Products. Inc.
Certain audio features of this product manufactured under a license
from Desper Products, Inc., Spatializer
device are trademarks owned by Desper Products, Inc.
3
Select the sound enhancement by pressing
/ .
Each time you press the button, the
sound enhancement changes.
Normal:
Normal sound.
3D:
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue:
To control critical center channel
information to make dialogue more
intelligible (only when playing a DVD
video disc recorded on the Dolby
Digital recording system).
• To use this enhancement on sounds
output from the BITSTREAM/PCM
jack, be sure to set "Audio Out
Select" to "PCM."
58
On-screen display operation (continued)
DVD
On-screen display operation (continued)
VCD
CD
*
2
3
*
Press DISPLAY again.
The on-screen display will vary depending on the disc.
2
3
0:08:16
9.6
: Data transfer rate (Mbit/s)
DVD
= Amount of picture, sound and subtitle data in the
DVD video disc transferred per second.
The larger the value is, the more data processed,
but this does not necessarily insure better picture
quality.
CD
: CD-Text
Displays CD-Text data if included on the audio
CDs. (Some letters may not be displayed properly
depending on the disc.)
OFF
To turn off the on-screen display, press
: The on-screen display turns off.
VCD
DISPLAY again.
1
2
/
/ /
CANCEL
.
58
®
3-Dimensional Sound Processing provided by Desper
®
and the circle-in-square
53
DISPLAY
/
ENTER
: Title number (Track number)
Locate a title or track using the number buttons.
46
: Chapter number
Locate a chapter using the number buttons.
46
: To stop playback.
43
: Playback starts from the beginning of the
current chapter or track.
46
: Fast reverse playback
44
: To start playback.
42
: Fast forward playback
44
: To locate succeeding chapters or tracks.
46
: To begin slow motion playback.
45
: To pause playback.
43
: To turn off the display.
55
Advertisement
Chapters
Table of Contents
