Table of Contents
Advertisement
Recording (VCR)
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
4
Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
1
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
5
2
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
00 : 00 : 00 SP
3
Setet "TV" or "CATV" option to the appropriate
position
.
27
To cancel OTR
Press STOP or turn off the power.
TV
- VHF/UHF channels
CATV - CABLE TV channels
"
Note:
If you wish to watch the DVD playback during the recording or the
OTR, press DVD/VCR to change to DVD mode and perform the
DVD playback
36
Recording (VCR)
Timer recording (continued)
Setting procedure
To set daily/weekly timer
To confirm or cancel a program
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-
1
SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At picture 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
When you press SET – repeatedly, the
indicator at DATE will change as follows,
in this case the day is Friday.
The current day (Friday)
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
One month later
2
minus one day
MO-FR (Monday to Friday)
WKL-WE
WKL-TH (Weekly Thursday)
(Weekly Wednesday)
DATE
START END
CH
WKL-WE
〈+/—/ENTER/CANCEL/MENU〉
If the programs overlap another
3
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8 : 00
9 : 00
10 : 00
11 : 00
Program 1
Program 2
Deleted Parts
4
Program 3
Non Recorded Portion Parts
Recording
Prog.1
Prog.2
Prog.3
Control Settings
Notes:
• The daily/weekly recording can be made continuously until the
recording is canceled or the tape reaches the end.
Notes:
• During timer recording the automatic rewinding mechanism
• If there are other timer record programs remaining, TIMER
does not function.
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
• You cannot confirm the Timer program during timer recording
operation.
• You can correct or cancel a programmed setting in program
confirm mode.
38
DVD/VCR
4
4
5
2
STOP
Press Number button or CH
/
to select the
channel to be recorded.
CH 110
Press OTR. Press the button again to stop
recording after 30 minutes. Each additional
press of OTR will increase recording time as
shown in the chart below, up to a maximum of 5
hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, "
"will keep blinking
in the display.
Press
Recording time Press
Recording time
once
NORMAL REC
6 times
3:00
0:30
4:00
twice
7 times
3 times
1:00
8 times
5:00
4 times
1:30
9 times
NORMAL REC
5 times
2:00
OTR 0 : 30
CH 125
INDEX
" will appear on screen for about 4 seconds.
.
43
DVD/VCR
SET +/–
ENTER
CANCEL
VCR MENU
TIMER REC
If the Timer has been activated, press TIMER
REC to deactivate the Timer.
The timer symbol (
) will
disappear. Then press DVD/VCR to
change to VCR mode.
To confirm Timer program:
At picture 1 on the previous page select "TIMER
REC SET" and press ENTER.
The timer program list will appear on the screen.
DATE
START END
CH
26(SU)
11:00
PM
11:30
PM
125
SLP
〈+/—/ENTER/CANCEL/MENU〉
To cancel Timer program:
Press SET + or – to select the unnecessary
program, then press CANCEL to cancel the
program.
DATE
START END
CH
—
〈+/—/ENTER/CANCEL/MENU〉
Press VCR MENU repeatedly until the menu
screen is cleared.
Timer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
Timer recording
Preparation:
5
To enter other programs, repeat step 2
• Press DVD/VCR to select the VCR mode.
through 4.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct
24
.
Example: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
1
Press VCR MENU. Select "TIMER REC SET",
then press ENTER.
MENU
TIMER REC SET
6
Press TIMER REC. The timer symbol (
AUTO REPEAT
ON
OFF
SAP
ON
OFF
appear on the display and the VCR stands by
CH SET UP
SYSTEM SET UP
for recording.
〈+/—/ENTER/MENU〉
2
Press SET + or – to select one of the program
line, then press ENTER.
DATE
START END
CH
—
NOTES:
• The timer recording will start at 5 seconds before the time
you predetermined.
• If the timer symbol(
〈+/—/ENTER/CANCEL/MENU〉
spite of the pressing of TIMER REC, the cassette may not
have been loaded yet.
3
• If the cassette is ejected in spite of the pressing of TIMER
Press SET + or – to select the date, then press
REC, the erase prevention tab of the cassette may have
ENTER.
DATE
START END
CH
been removed.
26(SU)
NOTES:
• If the timer symbol (
the TV program has not been completely recorded because of
〈+/—/ENTER/CANCEL/MENU〉
an insufficient tape supply. Press TIMER REC to cancel the
timer program or press TAPE EJECT to remove the cassette
tape.
4
Set the start time, end time, channel and tape
• During timer recording standby mode, the VCR mode cannot be
speed as in step 3.
selected. To use the VCR, press TIMER REC at first, then press
DVD/VCR to change to VCR mode. After you use the VCR,
DATE
START END
CH
press TIMER REC again to put the VCR into timer recording
26(SU)
11:00
PM
11:30
PM
125
SLP
standby mode.
• If you press TIMER REC during timer recording, the recording
operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
〈+/—/ENTER/CANCEL/MENU〉
again.
Notes:
• After a power failure or disconnection of the power plug, all
• Press CANCEL to move cursor backward for correction.
programmed recording settings and time display will be lost
• To record from external source set the channel to "L1" or
upon resumption of power. In this case, reset the clock
"L2". "L1" or "L2" will appear next to CH 125 (or 69).
reprogram any timer recordings.
Other functions (VCR)
Stereo recording and playback /
Separate Audio Program (SAP)
Stereo recording and playback
Separate Audio Program (SAP)
The VHS Hi-Fi audio system permits high fidelity recording
Your DVD/VCR is fitted with a SAP broadcast system which ena-
of MTS STEREO TV broadcasts.
bles you to switch to a separate audio program when viewing a
selected channel.
When a MTS STEREO broad-
This function applies only when the program is broadcast in multi-
cast is received, "STEREO" will
languages through the SAP broadcast system.
appear on the screen and the
STEREO
program can be viewed or re-
1
Press VCR MENU. Then press SET + or – to
corded in stereo.
select "SAP".
The Hi-Fi stereo recording pro-
cedure is the same as for normal
recordings.
Note:
When using a CATV system, stereo TV programs may be
transmitted over a mono cable channel. In this case
"STEREO" will not appear and the sound will be in mono.
2
Press ENTER to select "ON".
Output selection
When viewing an MTS stereo TV program, or playing a
prerecorded VHS Hi-Fi stereo videotape, press AUDIO
SELECT to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi stereo position,
this button can be set to the MONO position if the stereo
broadcast or videotape audio is of poor quality. The "R"
and "L" positions allow the audio from the Right or Left Hi-
Fi channel to be heard over both TV speakers. This
button has no effect when viewing a MONO videotape or
TV program. Each time when you press the button,
OUTPUT SELECTION display appears on the screen for
Listening to SAP
several seconds. Refer to the chart below.
When the VCR is turned on or a channel selection is
made, make certain the letters "SAP" appears on the
OUTPUT
SOUND HEARD ON BOTH
screen. This means that the "Separate Audio Program"
SELECTION
SPEAKERS
broadcasting is available.
STEREO
STEREO
L CH
LEFT CHANNEL AUDIO
R CH
RIGHT CHANNEL AUDIO
STEREO SAP
MONO
MONO
NOTES:
• When playing back a tape that is not recorded in Hi-Fi stereo
mode, the audio will automatically be monaural.
• When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cord not connected),
the sound will be monaural.
DVD/VCR
TAPE EJECT
2, 3
1-3
CANCEL
1, 5
TIMER REC
• To return to the normal screen,
press VCR MENU twice.
DATE
START END
CH
26(SU)
11:00
PM
11:30
PM
125
SLP
〈+/—/ENTER/CANCEL/MENU〉
) will
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the Timer recording mode.
If you do not use the DVD, turn the
power off.
) does not appear on the display in
29
29
) blinks when the timer recording ended,
24
and
37
DVD/VCR
TRACKING
ENTER
CANCEL
TIMER REC
Then press VCR MENU until the
menu screen is cleared.
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
SAP
ON
OFF
CH SET UP
SYSTEM SET UP
〈+/—/ENTER/MENU〉
SAP
OR
39
Advertisement
Chapters
Table of Contents
