Track Repeat Function; Microphone Volume - Akai A58084 Instruction Manual

USING YOUR APPLIANCE
PROGRAMMING TRACK SELECTION
1. This karaoke machine lets you program
the playing order for up to 20 music
tracks.
2. To use the program function, first press
the 'Stop' button to stop playback.
3. With playback stopped, press the 'Prog/
Repeat' button on the unit's control
panel. A track selection indicator will
appear on the screen.
4. Using the 'Forward' and 'Back' button,
select the track you want to program as
the first on your playlist.
5. Once you have selected the desired
track, click the 'Prog/Repeat' button
again to program it onto position 1. The
words 'PROG SET 00:XX' will appear on
the screen to confirm the process was
successful.
6. Once you have set the first track on
your playlist, repeat this process as
many times as necessary until you have
programmed all your chosen tracks into
the desired order.
NOTE: Please note you can only use the
Program function when playback is fully
stopped. You will not be able to program
tracks while the playback function is in
operation.

TRACK REPEAT FUNCTION

1. This karaoke machine lets you repeat
one or all of the tracks on your playlist
as many times as you desire.
2. To use the track repeat function, press
the 'Prog/Repeat' button on the unit's
control panel while a song or audio file
is playing. A symbol will appear on the
TFT screen to indicate this mode has
been selected.
3. Press this button once to repeat/loop
the current track. A '1' symbol will
appear on the TFT screen to confirm
your selection.
10
4. Press the button a second time to
repeat/loop your entire playlist. An 'A'
symbol will appear on the TFT screen to
confirm your selection.
5. To cancel the repeat/loop function,
press the button again.
KARAOKE FUNCTIONALITIES:
AUTOMATIC VOICE CONTROL
1. This karaoke machine is equipped with
an automatic voice control function,
which pushes the recorded vocals in a
track to the background to highlight the
singer's voice.
2. To regulate the volume of the recorded
vocals on a track, turn the dial marked
'AVC' on the unit's control panel while
the relevant track is playing.
BALANCE
1. To adjust the balance on a track, turn
the dial marked 'Balance' on the unit's
control panel while the track is playing.
ECHO
1. You can regulate the amount of reverb/
echo on a track. To do this, turn the dial
marked 'Echo', located on the right-
hand side of the unit's control panel,
while the track is playing.

MICROPHONE VOLUME

1. To adjust the volume of the microphone,
turn the dial marked 'Mic Volume'
on the unit's control panel while the
microphone is plugged into the unit.