Cleaning And Maintenance - Haier HWM95-261NZP Instruction Manual

Cleaning and maintenance

Before cleaning, be sure to unplug the power plug from the outlet.
. .
. .
When the washing is finished, close the faucet and remove the water inlet.
The power plug must be unplugged before maintenance.
Notice
Hang the power line and the drain hose.
Wipe the surface of the washing machine and the droplet of the tub with a clean soft cloth.
And open the lid for a period of time (about an hour), then close the lid after air dried.
Water inlet valve
a. Uncover the inlet pipe;
b. Remove the filter with a sharp-pointed plier;
c. Clean the filter with a soft brush
d. Install the filter
e.Connected to the water inlet pipe once again
once a mounth
The lint filter must be used during washing, and it
must be cleaned timely after each use.
a. Press the upper terminal
of the lint filter and pull
out the lint filter.
b. Pull up and open the lint
filter's back cover, and
clear the thread chips
in it.
Cabinet
a. Do not flush the cabinet with water directly.
b. Wipe it with a neuter detergent.
c. Do not wipe it with thinner, gasoline, alcohol
and other volatile items.
15
Lint filter
after washing
when the cabinet is dirty
d. Fit the lint filter.
c. Close the upper
lid of the lint filter
after cleaning.