The ProtoNode Start-up Guide
6.2
Change the ProtoNode IP Address
•
Enable DHCP to automatically assign IP Settings or modify the IP Settings manually as needed,
via these fields: IP Address, Netmask, Gateway, and Domain Name Server1/2.
NOTE: If the FieldServer is connected to a router, the IP Gateway of the FieldServer should be set
to the same IP Address of the router.
•
Click the Save button to activate the new settings.
NOTE: If the webpage was open in a browser, the browser will need to be pointed to the new IP
Address of the ProtoNode before the webpage will be accessible again.
NOTE: For Router settings go to Section 11.8.
Figure 24: Ethernet Port Network Settings
LAARS ProtoNode Start-up Guide
20
Industrial Way, Rochester, NH, USA 03867
(800) 900-9276
www.Laars.com
•
•
Page 25 of 72
25