Advertisement
Installing Boat Battery
1.Turn switch on boat cover to open
3.Connect the battery plug with circuit
board plug
Pairing Controller To Boat
Connect the battery then quickly turn on the power switch of the remote controller. A solid red light
will show, as well as a blinking green light. When the green light stop flashing your controller has
paired to your boat. Once battery is connected, be sure to turn on the controller within 5 seconds,
otherwise the boat and controller may not pair. If pairing fails, disconnect your battery and repeat
Step 3. After successfully pairing, place boat in the water, where you are now safe to operate and
have fun.
Safety Warning
This boat starts operating as soon as the battery is connected to the board. Make sure propellers
are not near you or others to avoid damage or injury. DO NOT OPERATE THIS BOAT OUTOF
WATER. Initial trimming may be necessary to adjust steering.
1. Recommended age 14 years, younger children should be supervised and
instructed by an adult.
2. Do not use boat in areas where people are swimming.
3. Inspect playing area for any foreign objects ie. Trees, roots, rocks.
Boat cover
Cover switch
Middle cover
2.Place Li-Ion battery into holder in
boat body
4.Replace boat cover and turn switch
to fasten
Advertisement
