Table of Contents
Advertisement
3.2
AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic
system configurations. These configurations are stored in the battery-backed CMOS
RAM and BIOS NVRAM so the information is retained when power is turned off.
To enter BIOS Setup, press <Del> or <ESC> immediately while your computer is
powering up.
The following BIOS menus and their functions are listed below.
Main – Date and time can be set here. Press <Tab> to switch between elements
Advanced – Enable/ disable boot option for legacy network devices
Chipset – Host bridge parameters
Security – The setup administrator password can be set here
Boot – Enable/ disable Quiet Boot option
Save & Exit –Save your changes and exit the program
Chapter 3 – AMI BIOS Setup
27
Advertisement
Table of Contents
