Nokia Intrusion Prevention Quick Setup Manual page 9

2
Perform the Initial Configuration
When you turn on your appliance for the first time, a console wizard automatically runs
that prompts you to provide initial configuration information.
The information you need to supply includes:
The local hostname for the appliance. The name you choose can include
alphanumeric characters, dashes (-), and periods (.).
The case-sensitive password for the admin user account. The admin user has
complete read/write privileges for all IPSO-LX features that can be configured
through Nokia Network Voyager, a Web-based element management interface.
The case-sensitive password for the root user account.
The physical interface to be used for the management interface, its IP address, and
network mask length.
The IP address of the default gateway for the appliance.
To perform the initial configuration
Establish a console connection to the appliance, using a terminal or terminal
1.
emulation program with the following port settings:
9600 bps
8 data bits
No parity
1 stop bit
The initial configuration begins with the following prompt:
2.
Hostname?
If the Hostname? prompt does not appear on the console, see the Nokia IPxxx
Intrusion Prevention with Sourcefire Installation Guide for your appliance for
troubleshooting suggestions.
Answer the prompts for hostname, user admin password, and user root password.
3.
4. When you see the following message, type 1.
You can configure your system in two ways:
1) configure an interface and use our Web-based Voyager via a
remote browser
2) configure an interface using CLI after reboot
Please enter a choice [ 1-2, q ]:
Nokia Intrusion Prevention with Sourcefire Appliance Quick Setup Guide 9