Nokia Intrusion Prevention Quick Setup Manual page 13

5
Enable the Sourcefire Sensor on Nokia Software
The Sourcefire Sensor on Nokia software comes preinstalled on your appliance. You
need only to enable it.
To enable the Sourcefire Sensor on Nokia software
1. Select System Configuration > Packages > Manage Packages from the tree view.
Click the Enable check box for the Sourcefire Sensor on Nokia package.
2.
Click the Submit button.
3.
After a short wait, a message appears tell you that the package has been registered.
Note
Although the message suggests a reboot might be necessary, you do not need to reboot
the sensor.
After the Sourcefire Sensor on Nokia package is enabled, a link to the Sourcefire Sensor
Configuration page appears in the Network Voyager tree view.
Nokia Intrusion Prevention with Sourcefire Appliance Quick Setup Guide 13