Table of Contents
Advertisement
Switch Removal
This is under power disconnected situation to handle:
1. push the glass from right to left, then take out the glass panel, replace the control board. Then
assemble the glass with the opposite way, comparing with disassemble the glass. And make sure
the re-assembled glass is on the same level with the range hood body.
2. Pull out the glass (as a whole set) forward, then take out the glass panel, replace the control
board. Then assemble the glass with the opposite way, comparing with disassemble the glass. And
make sure the re-assembled glass is on the same level with the range hood body.
explosive view
Blower case
Range Hood
Blower box
Sensor frame
LED
Chimney cover
Hook
Cover
Motor
Impeller
Retainer ring
Filter mesh
Filter mesh
Oil collector
Oil cup
12
Cap
Glass panel
Control
Advertisement
Table of Contents
