Installation Methods; Maintenance - Progress PDP6020E User Manual

INSTALLATION METHODS

Filtering or ducting version?
The hood may be in fi ltering or in ducting ver-
sion. Decide from the outset which type is to be
installed.
For better effi ciency, we recommend installing
the hood in the ducting version (if possible).
Ducting version.
The hood purifi es the air and evacuates it to the
outside through an exhaust duct.
Filtering version
The hood purifi es the air and recycles the clean
air back into the room.

MAINTENANCE

Clean grease fi lters in relation to use, at least
every 2 months to prevent the risk of fi re.
Hand wash or clean in a dishwasher using a
neutral detergent. If washing in the dishwasher,
possible discoloration of the fi lters does not in
any way compromise their functioning.
The activated charcoal fi lter is not washable and
cannot be regenerated, and must be replaced
approximately every 4 months of operation, or
more frequently for particularly heavy usage.
CONTROLS
1 : fi rst speed motor.
0 : OFF motor.
> + 2 : second speed motor.
> + 3 : third speed motor.
The opening/closing of the telescopic slide regulates
the Lights On/OFF.
LIGHTING
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs
ensure they are cooled down.
Replace it with lamps of the same type (CANDLE
LED 4W, 220-240V, E14, ø37mm).
ILCOS D code: DRBB/F-4-220-240-E14-37/100
progress 9